Bedienungsanleitung Spypoint Tiny-WBF (Seite 16 von 45) (Englisch)

569575

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Settings • Camera

Use the  and  buttons to navigate in the interface and modify the selec-

tion. Use the OK button to select and the  button to return to the previous

menu.

PHOTO

Allows the user to take photos. When the PHOTO mode is selected, the

test light in front of the camera will ash for 60 seconds to allow the user to

leave the area without being photographed.

VIDEO

Allows the user to take videos. When the VIDEO mode is selected, the

test light in front of the camera will ash for 60 seconds to allow the user to

leave the area without being recorded.

TEST

Allows the user to test the detection system of the camera. When

TEST mode is selected, no photo or video is recorded. Walk perpendicu-

larly in front of the camera. When the camera detects a movement, the

light blinks to indicate that normally, a photo or video would have been

recorded. If the system does not detect the movement, increase the detection

distance using the "Sensitivity" option in the settings menu. Realign the

camera can also be required. In TEST mode, it is possible to take a photo by

pressing the OK button. The photo is saved and appears in the VIEW mode.

INSTALLATION WITH THE SUPPLIED STRAP

Recommended installation height: about 3 feet above the ground.

Do not place the camera facing the sun.

SETTINGS

Allows the user to change the different settings. To set the system in

English, hold the button  until "Language" is highlighted. Press OK, select

"English" with the button  or  and conrm the choice with OK. The system

will then change the menus to English.

Camera ID: (TINY-PLUS, TINY-W

)

Allows the user to assign a name to the camera (maximum 8 characters).

Start time/Stop time:

Allows the user to set the operation period of the camera. The start and

stop time programmed hours are the hours during which the camera is in

action and records photos or videos. Example: If the user selects "15:00"

start time and "19:00" stop time, the camera will only detect for that

period of time and will stay inactive for the remaining hours. Press OK

and use  or  to adjust the hours. Press OK again to set the minutes.

When the time is properly set, press OK.

For a 24 hour activation, the same start and stop times must be entered

(example: 00:00 as start time and 00:00 as stop time. These hours are

the basic settings of the camera.

Note: The hours are recorded over a 24-hour period. For example, 5pm

is 17:00 (00:00 means midnight).

1. Insérez l’extrémité de la courroie dans la fente

qui se trouve au dos du mécanisme.

2. Insérez la courroie dans la fente sous le levier

et faites-la ressortir en arrière.

3. Créer une tension sur la courroie en la tirant vers

la droite, puis rabattez vers la gauche le levier pour

maintenir la position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spypoint Tiny-WBF Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spypoint Tiny-WBF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info