Bedienungsanleitung SQlab ERGOLUX (Seite 30 von 96) (Deutsch, Englisch, Holländisch, Französisch)

742373

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

SQlab | SPORTS ERGONOMICS | ERGOLUX® SADDLES | EDITION US 2019-02 | Page 6

The dierent models of the SQlab ERGOLUX® series are designed for the dierent areas of application of travel, everyday, city and trek-

king cycling and have undergone numerous testing procedures. An overload and damage to the saddle is determined by the nature of

the surface being ridden on, riding ability, riding style, weight or the total system weight and other special events, such as riding errors,

falls and accidents. In the description the intended use, we follow the international categorization ASTM F2043-13, which denes the

dierent elds of application as precisely as possible.

Model name Maximum rider weight

Deployment category according

to ASTM F

eBike Ready Label

SQlab  ERGOLUX

Saddles  kg Category  No

SQlab  ERGOLUX

active Saddles  kg Category  Yes

SQlab  ERGOLUX

Saddles  kg Category  Yes

SQlab  ERGOLUX

Saddles  kg Category  Yes

SQlab ERGOLUX

saddles are to be used exclusively on bicycles under the conditions of their corresponding category according to ASTM

F2043-13 or a lower category.

Intended use

Category 1 according to ASTM F2043-13

Bicycles/add-on components in this category must circulate only on tarred or paved roads and paths in which the

wheels have permanent ground contact.

Category 2 according to ASTM F2043-13

Bicycles/add-on components in this category may, in addition to the conditions of use referred to in category 1,

also circulate on gravel and unpaved roads of a moderate grade. In this category, there may be a short-term loss

of tyre ground contact in harsher terrain. Jumps (drops) from a height up to max. 15 cm can take place.

On our website www.sq-lab.com in the service area under downloads, you will nd a list of all types of

use according to ASTM F2043.

Warning

Each component has its load limit, which can be exceeded in case of overload or

during special driving manoeuvres. Please note the following:

• Never exceed the permitted system and rider weight.

• Use your saddle only in the intended use category, or a lower one (according to

ASTM F ).

• Aer situations in which especial or unexpected force has been exerted, such as

aer a crash, a cycling mistake or an accident, carry out an extraordinary inspecti-

on.

• If in doubt, the potentially damaged component should be replaced prophylacti-

cally. In such case, play it safe and ask your SQlab dealer for advice.

• For the protection of third parties, a component which is not immediately and

obviously recognisable as being defective should be clearly marked as unusable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SQlab ERGOLUX Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info