Bedienungsanleitung Stadler Form Charly little (Seite 7 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

669376

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

is fitted on protection grille rear as shown in illustration on page 2–3.

Close the two grilles by fastening the 8 fixing clips (13) (or 7 in the case

of Charly little). Ensure that all fixing clips (13) are fastened.

F. Secure the two grilles (7 and 11) with securing screw (14).

Setting up / operation

1. Place Charly at the desired position on a flat surface. Connect the mains

cable (17) to a suitable plug socket.

2. Switch on the Charly fan at the controller (15) and set the desired speed

(Positions 1–3, from gentle breeze to powerful circulation).

3. Push the oscillating knob (16) down to switch on the oscillation and pull

the oscillating knob up to switch off the oscillation.

4. The direction of airflow can be set in 4 positions. By carefully moving

the motor housing (4) up and down, the direction can be adjusted (click-

ing noise).

Cleaning

Prior to any maintenance, cleaning and after each use, switch off the appli-

ance and unplug the mains cable (17) from the socket.

Attention: Never submerge the appliance in water (danger of short-circuit).

• For external cleaning, rub with a damp cloth and then dry thoroughly.

• To clean the fan blades, remove securing screw (14), undo all fixing clips

(13) and carefully lift off protection grille front (11). Now you can wipe the

fan blades (9) with a damp cloth and dry well afterwards. After cleaning,

replace protection grille front (11) on appliance (fit top positioning clip: 12),

fasten all fixing clips (13) and fasten securing screw (14) tightly.

Repairs

• Repairs to electrical appliances must only be carried out by a qualified

electrical technician. If improper repairs are carried out, the warranty

lapses and all liability is refused.

• Never operate the appliance if the adaptor or plug is damaged, after it has

malfunctioned, if it has been dropped or has been damaged in any other

way (cracks/breaks in the casing).

• Do not push any object into the appliance.

• If the appliance is beyond repair, make it unusable immediately by cutting

through the cable and hand it in at the collection point provided for the

purpose.

Disposal

The European directive 2012 / 19 / CE on Waste Electrical and Electronic

Equipment (WEEE), requires that old household electrical appliances must

not be disposed in the normal unsorted municipal waste stream. Old appli-

ances must be collected separately in order to optimize the recovery and

recycling of the materials they contain and reduce the impact on human

health and the environment. The crossed out “wheeled bin” symbol on the

product reminds you of your obligation, that when you dispose of

the appliance it must be separately collected. Consumers should

contact their local authority or retailer for information concerning

the correct disposal of their old appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stadler Form Charly little Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info