will light up. If not, check to make sure that there is sufficient water in
the tray (11) and that the adapter is connected to the power supply. The
appliance has two humidification output levels which are selected using
the On/Off button (12). Press once for level II/press twice for level I/
press three times to switch off. The number of LEDs (13) indicates which
level you have selected.
5. If you find the LEDs too bright (in a bedroom, for example), you can re-
duce the light intensity by pressing the dimmer button (14). There are
three different modes to choose from:
• Normal mode (default mode)
• Dimmed mode (press once)
• Lights-out mode (press twice)
Press the dimmer button (14) again to return to normal mode.
6. Emma is the ideal travel companion and also provides pleasant air hu-
midity in dry hotel rooms. Allow the individual parts of the appliance to
dry completely before placing the housing (5) in the bottle (3) and sealing
the bottle. If you don’t have time to do this, simply do it at home or at
your next destination as residual moisture in the sealed bottle can lead
to an unpleasant smell.
7. Allow all the parts of the appliance to dry completely first before you
store Emma. Then open the bottle (3) and store the housing (5) in the
bottle. Important: The housing must be placed in the bottle with the
mist outlet at the front (16). Otherwise it will be difficult to remove the
housing from the bottle again (see point B on page 3).
Cleaning
Before maintenance and after every use, switch the device off and pull the
power adapter (8) out of the socket. Before you clean Emma, the power
adapter must be unplugged.
Careful: Never immerse the device in water (danger of short circuit).
• To clean the outside, rub with a damp cloth and then dry thoroughly.
• Cleaning the bottle (3): Clean the bottle once a month using warm wa-
ter, a drop of washing-up liquid and a brush or sponge. Then rinse out the
bottle thoroughly. If there are lime deposits in the bottle or on the lid of
the bottle (4), we recommend that you use a household descaling agent
or vinegar.
• Cleaning the water tray (11): Clean the water tray once a month. Re-
move the cover (10) from the housing (5). Empty the water tray (11) via the
front of the tray – where the mist outlet (16) is located. This will prevent
water from entering the air outlet opening (15). Now clean the tray using
warm water and the cleaning brush (17) provided. If there are lime depos-
its in the water tray, we recommend that you use Stadler Form Cleaner &
Descaler (www.stadlerform.com/accessories). Alternatively, you can use
a household descaling agent or vinegar. Then rinse the tray thoroughly.
• No water may enter the air outlet opening (15). This will damage the ap-
pliance and will void any claim to the warranty.
Repairs
• Repairs to electrical appliances must only be carried out by a qualified
electrical technician. If improper repairs are carried out, the warranty
lapses and all liability is refused.
