Bedienungsanleitung Stadler Form Leo (Seite 6 von 58) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

807161

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

• Assemble the appliance in accordance with the instructions for Assembly.

Follow the instructions for assembly exactly and ensure that all screws

are firmly tightened so as to avoid damage and hazards.

• Never insert objects into the grille of the fan. Do not cover the appliance

during operation.

• Always disconnect the power cord from the socket before removing the

protection grille.

• Only connect the cable to alternating current. Observe the voltage infor-

mation given on the appliance.

• Do not use damaged extension cords.

• Do not run the power cord over sharp edges and make sure that it does

not get trapped.

• Do not pull the plug from the socket with wet hands or by holding on to

the power cord.

• Do not use the appliance in immediate vicinity of a bath tub, a shower or a

swimming pool (observe a minimum distance of 3 m). Place the appliance

such that a person in the bath tub cannot touch the appliance.

• Do not place the appliance near a heat source. Do not subject the power

cord to direct heat (such as a heated hotplate, open flames, hot iron sole

plates or heaters for example). Protect power cords from oil.

• See to it that the appliance is properly positioned to ensure a high stabil-

ity during its operation and make sure that no one can trip over the power

cord.

• The appliance is not splash-proof.

• For indoor use only.

• Do not store the appliance outdoors.

• Store the appliance in a dry place inaccessible to children (pack the ap-

pliance).

• Prior to any maintenance, cleaning and after each use, switch off the ap-

pliance and unplug the mains cable from the socket.

• Repairs to electrical appliances must only be carried out by a qualified

electrical technician.

• Only use the adapter provided by the manufacturer.

Setting up / operation

1. To pick up Leo, push the carrying handle (1) upwards. Place Leo in the

desired location on a flat surface. Connect the power adapter (2) to the

appliance (3) and insert the adapter into a suitable mains socket.

2. Switch on the appliance by pressing the on/off button (4). The appliance

gives an audible signal when a setting is changed via the control panel.

3. Press the button for the selection of the speed level (5) to change the

fan speed (levels 1–4). Pressing once increases the speed by one level.

struction concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without supervision.

•Never leave any parts of the packing within the reach of children.

•If the supply cord is damaged, it must be replaced by the manufacturer,

or its service agent, or a qualified person in order to avoid a hazard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stadler Form Leo Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info