Bedienungsanleitung Stadler Form Simon (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

807162

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

screws at the back on the air inlet grille are firmly tightened. Do not plug the

mains cable into the socket until you have finished assembling the device.

• Remove the fixing screw (1) from underneath the pole (2).

• Insert the pole (2) into the foot (3) and secure it using the screw (1).

• Finally, push the fan housing onto the top of the pole (2) until you hear

the pole click into place.

Note: When the device is used for the first time, the motor will have to align

itself first. This can take a couple of seconds.

Setting up / operation

1. Place Simon in the desired location on a flat surface. Connect the cable

for the power adapter (4) to the cable for the foot-operated switch (5).

Connect the power adapter to a socket with the correct voltage rating.

2. Switch on the appliance by pressing the on/off button (5) on the foot-

operated switch (5). The appliance gives an audible signal

3. Press the button for the selection of the speed level (7) to change the

fan speed (levels 1–10). Pressing once increases the speed by one level.

If you would like to increase the speed by another level, press again.

The setting chosen is indicated by the number of LEDs illuminated un-

derneath the on/off button (6) (1 LED for levels 1 + 2, 2 LEDs for levels 3

+ 4, 3 LEDs for levels 5 + 6, 4 LEDs for levels 7 + 8 and 5 LEDs for levels

9 + 10).

4. Activate swing mode by pressing the vertical swing mode button (8).

The appliance now swings at an angle of approx. -5°–85° to ensure

optimum distribution of cooling air throughout the room. Press the swing

mode button (8) again if the appliance is to remain at a certain angle.

5. For optimum distribution of cooling air from left to right, activate the

horizontal swing function (9). Together with the vertical swing function,

this will create 3D air circulation throughout the whole room. There are

3 angle settings to choose from for the horizontal swing function: 60°,

90° or 180°. To select a setting, press the button for the horizontal swing

function (9) until the LED underneath your chosen angle setting lights

up. If the LED underneath the button (9) is not illuminated, the horizontal

swing function is deactivated.

6. Press the button for the selection of “Natural Breeze” mode (10) for

natural wind conditions. The white LED above the button (10) will now

light up. This mode provides an even more pleasant cooling effect, simu-

lating a natural breeze. The fan speed of this breeze automatically varies

depending on the selected speed level.

7. By pressing the button for the timer (11) you can set the operating time

for between 1 and 7 hours (for example, 3 h = 1 h and 2 h LEDs lit, 7 h =

1 h, 2 h and 4 h LEDs lit). The selected time is displayed above the timer

button (11) with white LEDs. Press once to set the operating time to 1 h,

press the button again for 2 h, and so on. The remaining time is indicated

by the illuminated LEDs above the timer button (11). The unit switches

off automatically after the set operating time has elapsed. If no LEDs are

lit above the timer button (11), the unit is set to continuous operation.

8. Switch off the appliance by pressing the on/off button (6). Alternatively,

you can switch off the device by pressing the foot-operated switch (5).

The device has a power memory function which stores the last setting

selected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stadler Form Simon Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info