Bedienungsanleitung Stagg EDA 40 (Seite 1 von 2) (Englisch)

644330

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

BACK PANEL:

WARNING: This amplier must be earthed. Please check that the supply voltage details given on the

rating label (located on the rear panel) are in accordance with your electricity supply.

1 MAINSINPUT: This is the input socket into which the mains power cable must be connected. This

amplier is supplied with a power cable with a moulded-on plug. If the socket outlets in the home are not

suitable for this plug, use an appropriate plug adapter that can handle the power required for the amplier.

2 POWERFUSE: In the event of the power fuse having to be replaced, rst unplug the power cable

from the mains outlet. Then remove the fuse cover and replace the power fuse with another fuse of the

same type and value. Never plug the power cable back into the mains outlet without the fuse cover. If the

power fuse blows up again when powering on the amplier, take the apparatus to a suitable service centre

for repair.

3 CD/MP3INPUT: This is a line level 1/8” (Ø 3.5 mm) mini stereo jack into which an MP3/CD/Tape

player may be connected.

4 HEADPHONES This is a 1/4” (Ø 6.3 mm) standard jack output to connect the headphones. When

headphones are connected, no sound is produced from the speaker.

5 DRUMSINPUT: Plug your electronic drums in here, using the Left and Right 1/4” (Ø 6.3 mm) jack

inputs for stereo sound sources, or the Left input alone for mono sound sources. We recommend that

you always use a high-quality shielded cable to prevent any background noise interference or unwanted

feedback.

6 AUXILIARYINPUT: Here you can plug in any other instrument using a 1/4” (Ø 6.3 mm) mono jack

input. Again, we recommend that you always use a high-quality shielded cable to prevent any background

noise interference or unwanted feedback.

PLEASENOTE: Drum amplifying can prove complicated, because the sounds involved range from bass-

heavy kick drum to high-pitched cymbals. It is therefore possible that you may have to use different

settings depending on the type of music you play. Remember that the EDA-40 is designed primarily as an

indoor amp.

FeaturesandSpecicationsaresubjecttochangewithoutnotice.

FRONT PANEL:

1 AUXILIARYVOLUME: This control determines the output volume for the auxiliary channel.

2 DRUMGAIN: This control determines the gain level for the drum channel.

3 DRUMCOMPRESSION: This control reduces the dynamic range of the output signal and evens out

the changes in volume that occur according to how hard you hit your electronic drums. Adding compression

will make your electronic drums sound smoother and clearer and avoid unnecessary distortion.

4 TREBLE: This control determines the level of high frequencies in the output signal. Adding treble will

make the drums sound brighter and sharper.

5 MIDDLE: This control determines the level of middle frequencies in the output signal. Adding mid will

make your drums sound rounder and fuller.

6 PARAMETRICMIDDLE: Parametric mid is a more sophisticated way of boosting or cutting middle

frequencies. In a traditional EQ, the frequency area that is boosted or cut is xed. With a parametric mid

EQ, this frequency area is adjustable from mid low to mid high. Use this knob to select the required range

of middles, then use knob # 5. to determine the level of the selected range of mid frequencies.

7 BASS: This control determines the level of low frequencies in the output signal. Adding bass will make

your drums sound warmer and heavier.

8 MASTER: This control determines the overall volume of the amplier.

9 POWER: This switch turns the amplier on or off. The switch is lit up when the amp is powered on.

2 3

USER’S MANUALSUSER’S MANUAL EDA 40 EDA 40

4 5

6 7 8 9 3 4 5 6

TECHNICAL SPECIFICATIONS

Max.RatedPower/Loudspeaker 40W RMS @ 4Ω load / 10” Woofer w/ Coaxial Tweeter

FrequencyResponse 35Hz to 10kHz

TotalHarmonicDistortion ≤ 1%

SignaltoNoiseRatio 60dB (@ max. Rated Power)

InputImpedance

150kΩ (Instrument) / 22kΩ (Aux.)

PowerConsumption

70W max

MaximumInputLevel

140mV (Instrument) / 50mV (Aux.)

MaximumGain

70dB (Instrument) / 75dB (Aux.)

Dimensions(HxWxD)

42 x 38 x 27cm / 16.5 x 14.5 x 10.6in.

Weight

12.3kg / 27.1lb

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stagg EDA 40 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stagg EDA 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info