Bedienungsanleitung Stagg KBA 40 (Seite 1 von 2) (Englisch)

644331

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

BACK PANEL:

WARNING: This amplier must be earthed. Please check that the supply voltage details given on the

rating label (located on the rear panel) are in accordance with your electricity supply.

1POWERSWITCH: This switch turns the amplier on or off.

2MAINSINPUT: This is the input socket into which the mains power cable must be connected. This

amplier is supplied with a power cable with a moulded-on plug. If the socket outlets in the home are not

suitable for this plug, use an appropriate plug adapter that can handle the power required for the amplier.

3POWERFUSE: In the event of the power fuse having to be replaced, rst unplug the power cable from

the mains outlet. Then remove the fuse cover and replace the power fuse with another fuse of the same

type and value. Never plug the power cable back into the mains outlet without the fuse cover. If the power

fuse blows up again when powering on the amplier, take the apparatus to a suitable service centre for

repair.

4CD/MP3INPUT: This is a line level 1/8” (Ø 3.5 mm) mini stereo jack into which an MP3/CD/Tape

player may be connected.

5LINEOUT: This 1/4” (Ø 6.3 mm) mono jack output can be connected directly to a mixing desk or a

more powerful amplifying system.

6HEADPHONES: This is a 1/4” (Ø 6.3 mm) standard jack output to connect the headphones. When

headphones are connected, no sound is produced from the speaker.

7INSTRUMENTINPUT: Plug your keyboard in here, using the Left and Right 1/4” (Ø 6.3 mm) jack

inputs for stereo sound sources, or the Left input alone for mono sound sources. We recommend that

you always use high-quality shielded cables to prevent any background noise interference or unwanted

feedback.

8MICINPUT(XLR): Here you can plug in a microphone, using an XLR cable.

FeaturesandSpecicationsaresubjecttochangewithoutnotice.

FRONT PANEL:

1 MICVOLUME: This control determines the output volume for the microphone channel.

2 MICREVERB: Use this regulate to dose the amount of reverb effect you want on the microphone.

3 INSTRUMENTGAIN: This control determines the gain level for the keyboard channel.

4 INSTRUMENTCOMPRESSION: This control reduces the dynamic range of the output signal and

evens out the changes in volume that occur according to how hard you play your keyboard. Adding

compression will make your keyboard sound smoother and clearer.

5 TREBLE:This control determines the level of high frequencies in the output signal. Adding treble will

make the keyboard sound brighter and sharper.

6 MIDDLE: This control determines the level of middle frequencies in the output signal. Adding mid will

make your keyboard sound rounder and fuller.

7 PARAMETRICMIDDLE: Parametric mid is a more sophisticated way of boosting or cutting middle

frequencies. In a traditional EQ, the frequency area that is boosted or cut is xed. With a parametric mid

EQ, this frequency area is adjustable from mid low to mid high. Use this knob to select the required range

of middles, then use knob # 6. to determine the level of the selected range of mid frequencies.

8 BASS: This control determines the level of low frequencies in the output signal. Adding bass will make

your keyboard sound warmer and heavier.

9 MASTER: This control determines the overall volume of the amplier.

10POWERLED: Is lit up when the amplier is switched on.

2 3

USER’S MANUALSUSER’S MANUAL KBA 40 KBA 40

4 5

6 7 8

3 4 5 6 7 8 9 10

TECHNICAL SPECIFICATIONS

Max.RatedPower/Loudspeaker 40W RMS @ 8Ω load / 8” Woofer w/ Coaxial Tweeter

FrequencyResponse 45Hz to 15kHz

TotalHarmonicDistortion ≤ 0.8%

SignaltoNoiseRatio - 58dB (@ max. Rated Power)

InputImpedance 240Ω (Mic) / 30kΩ (Instrument)

PowerConsumption 70W max

MaximumInputLevel(VoltsRMS) 12mV (Mic) / 35mV (Instrument)

MaximumGain 65dB (Mic) / 68dB (Instrument)

Dimensions(HxWxD) 38 x 37 x 26cm / 15 x 14.6 x 10.2in.

Weight 12.4kg / 27.3lb

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stagg KBA 40 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stagg KBA 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info