Bedienungsanleitung Standard Horizon CPF300i (Seite 96 von 166) (Englisch)

603509

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

Page 98 CPF180i and CPF300i

Value Added Data : Turns the Value Added Data On or Off. The Value Added Data (VAD) is a collection of additional

cartographic objects which are not present on the original paper chart (from which the electronic

chart derives). These objects have been obtained from other sources and then merged to the

electronic charts in order to provide more information useful for the navigation. VAD object can

be any cartographic objects and it can be distinguished from the official-chart-objects from the

Quick Info. A dedicated icon is shown on the Quick Info window to indicate that the object queried

is a VAD. The same icon is also shown on the Full Info page and in addition the extended text Value

Added Data is shown on the details of the VAD object. See the figure below:

Example of VAD object

Chart Lock (*) : Turns the chart function On/Off. When Chart Lock is On, the available zoom scales are only the

ones containing cartographic data. Instead when Chart Lock is Off, it is possible to zoom down

into zoom scales not covered by cartographic data after the last available zoom scale covered by

cartographic data. The DSI (Data Safety Indicator) window, if present, will show “NO CHART”,

when an empty level is entered in the location of chart expansion mode.

Mixing Levels : When the chart coverage at the current chart scale does not fill the entire display, the GPS Chart

Plotter draws the rest of the chart using charts from above and below the current scale. When this

function is turned on you will notice the display may redraw 2 to 3 times to show all the details.

NOTE(*)

When an empty level is entered, the message “No cartographic coverage” is shown on a window

in a corner of the chart display. The warning message is always displayed as long as the current

zoom has no data coverage.

12.0.12 Underwater Objects Settings

The following selections are used to control which Underwater Objects are shown on the

Chart Page.

Underwater Object Limit : Selects the max depth value to display Underwater Objects. If value is set to 0 Feet, the

Underwater Objects are not shown on the charts. Menu options are grayed out. If value is more

than 0 Feet (i.e. 10 Feet), in the Range from 0 Feet to the selected value the Underwater Objects

are displayed according to their setting below.

Rocks : Sets Off/Icon/Icon+Depth* the displaying of the Rocks.

Obstructions : Sets Off/Icon/Icon+Depth* the displaying of the Obstructions.

Diffusers : Sets Off/Icon/Icon+Depth* the displaying of Diffusers (Diffuser is a structure on an outfall

through which liquids are discharged. The structure will usually project above the level of the

outfall and can be an obstruction to navigation).

Wrecks : Sets Off/Icon/Icon+Depth* the displaying of Wrecks.

NOTE(*)

Choose the options: OFF (the object is not visible independently of the selected “Underwater Object

Depth Value”); ICON (the object icon is visible without tags, in the range selected from “Underwater

Object Depth Value” option); ICON+DEPTH (the object icon and tag is visible, in the range selected

from “Underwater Object Depth Value” option).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Standard Horizon CPF300i Seite 96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info