603494
29
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
Radar Operation Manual Page 31
Handling of Center Offset
If the Radar is in Relative Motion mode, positioning the Cursor on the center of the Radar
image, allows editing the Center Offset (“CTR” message is shown under the cursor
position). The Soft Keys are automatically displayed
(EXCEPT CP180/CP180i)*:
[MOVE] When selected allowing the ShuttlePoint knob to move it at any location on the Radar screen
[ENTER] Confirms the new position of the center.
[CLEAR] Resets the position of the Radar image at 0,0.
[O
FFSET] Opens an edit window where it is possible to edit the X Offset and Y Offset position in pixel at which
the center of the screen is positioned.
NOTE for CP180/CP180i*
Pressing [ENT] opens an Options window with MOVE, ENTER, CLEAR and OFFSET items, move
the ShuttlePoint knob to highlight what you want and press [ENT] to select.
To use the Radar menu to set the Center Offset follow the procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight
FEATURES and press [ENT].
2. Move the ShuttlePoint knob to highlight
CENTER OFFSET and press [ENT].
3. Move the ShuttlePoint knob to highlight the desired choice and press [ENT].
4.3.4 User Points
AVAILABLE ONLY IN THE RADAR FULL PAGES
It is possible to show the Marks and Waypoints in a Route on the Full Radar pages: when
the Cursor is moved over top of icon, Mark information window appears.
N
E
W
S
Figure 4.3.4 - Marks display on Full Radar page
To turn the Marks display On or Off, follow this procedure:
1. Press [MENU]. Move the ShuttlePoint knob to highlight
FEATURES and press [ENT].
2. Move the ShuttlePoint knob to highlight
USER POINTS and press [ENT].
3. Move the ShuttlePoint knob to highlight
ON or OFF and press [ENT].
4.3.5 AIS Targets
AVAILABLE ONLY IN THE RADAR FULL PAGES
It is possible to show the AIS Targets on the Full Radar pages: when the Cursor is moved
over top of icon, a AIS popup window appears.
NOTE
This function is only available when a optional AIS receiver is connected to the Chart Plotter.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Standard Horizon CPV350 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info