603512
27
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
Page 27HX751E
4. Press the
[
SQL
]
key to select the Menu item “04
tEP”.
5. Press the
[
]
or
[
]
ke2y to set the difference be-
tween HX751E display and the calibrated thermom-
eter.
For example, if the HX751E display shows “25.5 °C”
and the (calibrated) thermometer indicates “23.0 °F”, set the temperature
offset to “–2.5 °C”.
6. Press the
[
SQL
]
key to save the new setting, then press the PTT switch to
exit to normal operation.
The temperature sensor may not display the correct temperature when
the temperature inside the radio is high; for example, while the trans-
mission mode or high receiver audio output.
6.14 ENABLING S.O.S STROBE OPERATION
The S.O.S. STROBE feature utilizes the high-intensity strobe LED on the front
of the HX751E as a visual distress beacon. When enabled, the LED blinks the
internationally-recognized Morse Code “S.O.S.” message (
...
---
...
) at a rate of
5 words per minute. This can be very useful in summoning help from rescuers
who may not be able to communicate with you via radio.
6.14.1 ACTIVATING S.O.S STROBE OPERATION
1. Turn the transceiver off.
2. Hold down the
[
SQL
]
key, and then turn on the transceiver while still hold-
ing down the
[
SQL
]
key.
3. SEt” will appear on the display, indicating that the Menu (“Set”) Mode has
been activated.
4. Press the
[
SQL
]
key to select the Menu item “12 SOS”.
5. Press the
[
]
or
[
]
key to select “SoS”.
6. Press the
[
SQL
]
key to save the new setting, then press the PTT switch to
exit to normal operation.
6.14.2 OPERATION
1. Hold down the
[
LIGHT
(
STROBE
)]
key for 1 second, to activate the emer-
gency S.O.S. Strobe. The TX/BUSY LED will flash the Morse Code S.O.S.
message repeatedly.
2. The S.O.S. strobe function is interrupted when a signal is received or if the
squelch control is turned so audio is heard from the speaker.
3. To disable the S.O.S. strobe function, hold down the
[
LIGHT
(
STROBE
)]
key for 1 second again.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Standard Horizon HX751E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info