Bedienungsanleitung Standard Horizon RAM 3 - CMP30 (Seite 1 von 2) (Englisch)

603490

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Declaration of Conformity

We, YAESU UK LTD. declare under our sole responsibility that the following

equipment complies with the essential requirements of the Directive 1999/5/EC.

Type of Equipment: Handset

Brand Name: STANDARD HORIZON

Model Number: CMP30

Manufacturer: Vertex Standard Co., Ltd.

Address of Manufacturer: 4-8-8 Nakameguro Meguro-Ku, Tokyo 153-8644, Japan

Applicable Standards:

This equipment is tested and conforms to the essential requirements of direc-

tive, as included in following standards.

EN 301 843-1 (2004-06)

EMC Standard:

EN60950-1:2006

Safety Standard:

The technical documentation as required by the Conformity Assessment pro-

cedures is kept at the following address:

Company: YAESU UK LTD.

Address: Unit 12, Sun Valley Business Park, Winnall Close

Winchester, Hampshire, SO23 0LB, U.K.

Disposal of your Electronic and Electric Equipment

Products with the symbol (crossed-out wheeled bin) cannot be

disposed as household waste.

Electronic and Electric Equipment should be recycled at a facil-

ity capable of handling these items and their waste byproducts.

In EU countries, please contact your local equipment supplier representative

or service center for information about the waste collection system in your

country.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference including received, interference

that may cause undesired operation.

RAM3

(

CMP30

)

Remote Station Microphone

The RAM3

(

CMP30

)

allows you to remotely control all functions of Standard Horizon

fixed mount VHF radios which include the Quantum series, Matrix series, Quest-X,

Quest+, PS1000 and PS2000. The full dot matrix display and programmable keys

make operation simple and fast. Additional features include turning the radio on/off

and all DSC functions including Distress. When connected to the Matrix GX3000S, or

the Quantum series, this remote station microphone also controls the 30W PA/hailer

functions. The RAM3

(

CMP30

)

can be extended up to 70 feet using the optional CT-

100 (23 Foot) extension cable. The RAM3

(

CMP30

)

is backed by an industry leading

3-year waterproof warranty.

Owner’s Manual

The details of the installation and operation of the RAM3

(

CMP30

)

is included

in the owner’s manual of the compatible fixed mount radio, or it can be down-

loaded at

www.standardhorizon.com. If you have any questions or comments,

please contact Standard Horizon Marine Product Support at 800/767-2450.

1. Connect the Extension Cable to the 8-pin connector on the transceivers rear panel,

then tighten the Cable Nut (Figure 1).

2. Referring to Figure 2, attach the supplied ferrite core as close as possible to the MIC

plug of the Routing Cable and External Speaker Connections, then snap its two

halves together. And then, wind some plastic tape around the ferrite core, to prevent

vibration from causing the two halves to split apart and fall off the wires.

3. Referring to Figure 3, make a 1.2” (30 mm) hole in the wall then insert the Exten-

sion Cable into this hole. Connect the Gasket and Mount Base to the Extension

Cable Connector using the Nut.

4. Drill the four Screw holes (approx. 2 mm) on the wall then install the Mounting

Bracket to the wall using four screws.

5. Put the Rubber Cap on to the Nut.

6. The installation is now complete. Connect the RAM3

(

CMP30

)

to the Extension

Cable Connector and tighten the Cable Nut.

RAM3

(

CMP30

)

INSTALLATION

FIGURE 1

FIGURE 3

VERTEX STANDARD CO., LTD.

No portion of this manual

may be reproduced

without the permission of

VERTEX STANDARD CO., LTD.

4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan

VERTEX STANDARD

US Headquarters

10900 Walker Street, Cypress, CA 90630, U.S.A.

YAESU UK LTD.

Unit 12, Sun Valley Business Park, Winnall Close

Winchester, Hampshire, SO23 0LB, U.K.

VERTEX STANDARD HK LTD.

Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,

Kwun Tong, Kowloon, Hong Kong

VERTEX STANDARD

(

AUSTRALIA

)

PTY., LTD.

Normanby Business Park, Unit 14/45 Normanby Road

Notting Hill 3168, Victoria, Australia

NOTE

The routing cable can be cut and spliced, however care needs to be

taken when reconnecting the wires to ensure water integrity.

Before cutting the cable make sure it is not plugged into the radio. After

cutting you will notice there are the following wires:

Yellow, Green, Brown, Purple, Blue, Green, Red

, and Shield

Ú The Red and Shield wires are wrapped in foil. Remove the foil, and

separate the Red and Shield wires.

EAG36X100

INCLUDED ACCESSORIES AND REPLACEMENT PART NUMBERS

1. 23-Foot Routing Cable (S8101512)

2. Rubber Cap (RA052520A)

3. Mounting Bracket (RA052510) & Screws (U24312020 x 4 pcs)

4. Microphone Hanger (RA458800: Black or RA436000: White) &

Screws (U40412220 x 2 pcs)

5. Ferrite Core (L9190182)

FIGURE 2

Wall

Gasket

Mounting Bracket

Routing Cable

Cap

Nut

External Speaker Connections

Ferrite Core

53 4

As close as possible

Routing Cable or

CT-100 Extension Cable

Ferrite Core

Snap together

External Speaker

Connections

Standard Horizon RAM 3 - CMP30 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info