Bedienungsanleitung Stanley FME380 (Seite 10 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Norwegisch, Finnisch)

720791

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

(Original instructions)

u Injuries caused when changing any parts, blades or ac-

cessories.

u Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

u Impairment of hearing.

u Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially

oak, beech and MDF.)

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms. along with the date code, are shown

on the tool:

Warning! To reduce the risk of injury, the

user must read the instruction manual.

Wear safety glasses or goggles.

Wear ear protection.

Wear a dust mask.

This product is not to be used by children

under 16.

No Hands Zone - Keep ngers and arms

away from rotational saw blades.

Wear gloves when handling saw blades.

Warning! Laser radiation.

Do not view the laser beam directly with

optical instruments.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Stanley Fat Max Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Trigger On/Off switch

2. Cutting depth scale

3. Clamp for setting cutting depth

4. Lower guard

5. Parallel guide adjustment knob

6. Parallel guide

7. Footplate

8. Clamping ange

9. Blade bolt

10. Trigger lock and shoe release button

11. Ventilation slots

12. Laser sight

13. Connection for dust extraction

14. Spindle-lock button

15. Hex key

16. Diamond saw blade

17. Hardened steel saw blade

18. TCT saw blade

19. Dust extraction hose

20. Line-of-cut indicator

Assembly

Check for damage to the tool, parts and accessories which

may have occurred during transportation. Take some time to

read this manual carefully and understand all the content prior

to assembly and operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley FME380 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info