Bedienungsanleitung Stanley FMEH750 (Seite 5 von 60) (Alle Sprachen)

720432

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISH

(Original instructions)

Labels on tool

The following pictograms are shown on the tool along with the

date code:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Wear ear protectors with Impact drills. Exposure

to noise can cause hearing loss

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Stanley FatMax Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Lock on button

3. Forward/reverse switch

4. Drilling mode selector

5. Twin sleeve Chuck

6. Side handle

7. Depth gauge hole

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingthesidehandleanddepthstop(g.A)

u Turn the grip counterclockwise until you can slide the side

handle (6) onto the front of the tool.

u Rotate the side handle into the desired position ensuring

that the notches (6a) engage with the notches on the tool

(5a).

u To release and turn, slide the handle forward to adjust and

then make sure it is re-engaged with the notches for use.

u Insert the depth gauge (not supplied) into the mounting

hole (7) as shown.

u Set the drilling depth as described below.

u Tighten the side handle by turning the grip clockwise.

Settingthedrillingdepth(g.A)

u Slacken the side handle (6) by turning the grip counter-

clockwise.

u Set the depth gauge (not supplied) to the desired position.

The maximum drilling depth is equal to the distance be-

tween the tip of the drill bit and the front end of the depth

gauge.

u Tighten the side handle by turning the grip clockwise.

Fittinganaccessory(g.B)

u Open the chuck by turning the sleeve (5) counterclock-

wise.

u Insert the bit shaft (8) into the chuck.

u Tighten the chuck by turning the sleeve clockwise.

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Before drilling into walls, oors or ceilings, check for

the location of wiring and pipes.

Switchingonandoff(g.C)

u To switch the tool on, press the variable speed switch (1).

The tool speed depends on how far you press the switch.

u For continuous operation, press the lock-on button (2) and

release the variable speed switch. This option does not

work in reverse rotation.

u To switch the tool off, release the variable speed switch.

To switch the tool off when in continuous operation, press

the variable speed switch once more and release it.

Selectingthedirectionofrotation(g.D)

For drilling and tightening screws, use forward (clockwise)

rotation. For loosening screws or removing a jammed drill bit,

use reverse (counterclockwise) rotation.

u To select forward rotation, push the forward/reverse slider

(3) to the left.

u To select reverse rotation, push the forward/reverse slider

to the right.

Warning! Never change the direction of rotation while the

motor is running.

Selectingthedrillingmode(g.E)

u For Impact drilling in masonry and concrete, set the

drilling mode selector (4) to the

position.

u For drilling in steel, wood and plastics or for screw driving

set the operating mode selector (4) to the

position.

Accessories

The performance of your tool depends on the accessory used.

Stanley Fat Max accessories are engineered to high quality

standards and designed to enhance the performance of your

tool. By using these accessories you will get the very best

from your tool.

Maintenance

Your Stanley Fat Max corded/cordless appliance/tool has

been designed to operate over a long period of time with a

minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

u Switch off and unplug the appliance/tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley FMEH750 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info