Bedienungsanleitung Stanley KFFMEW440 (Seite 6 von 84) (Alle Sprachen)

720727

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

(Original instructions)

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool along with the

date code:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Stanley Fat Max Service

Centre in order to avoid a hazard.

Using an extension cable

u Always use an approved extension cable suitable for the

power input of this tool (see technical data). Before use,

inspect the extension cable for signs of damage, wear and

ageing. Replace the extension cable if damaged or defec-

tive. When using a cable reel, always unwind the cable

completely. Use of an extension cable not suitable for the

power input of the tool or which is damaged or defective

may result in a risk of re and electric shock.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Dust extraction outlet

5. Sanding disc

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting the sanding disc (g.A)

u Place the tool on a table, with the spindle facing up.

u Place the sanding disc (5) onto the spindle.

u Secure the sanding disc using the screws (6).

Fitting sanding sheets (g. B)

Warning! Never use the tool without a sanding sheet or ac-

cessory in place.

u Press the sheet rmly and evenly onto the sanding disc

(5), making sure that the holes in the sheet line up with the

holes in the base.

Fitting and removing the dustbag (g. C)

u Fit the dustbag (7) over the dust extraction outlet (4).

u To remove the dustbag, pull it off the dust extraction outlet.

Connecting a vacuum cleaner (g. D)

u Insert the hose (8) of the vacuum cleaner into the dust

extraction outlet (4).

Use

Warning! Let the tool work at its own pace. Do not overload.

Variable speed control

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

u Set the control knob (3) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and for

removing paints.

Switching on and off

u To switch the tool on, press the on/off switch (1).

u For continuous operation, press the lock-on button (2) and

release the on/off switch.

u To switch the tool off, release the on/off switch. To switch

the tool off when in continuous operation, press the on/off

switch once more and release it.

Automatic brake system

This feature keeps the speed of the disc limited as long as

the tool does not touch the workpiece. As soon as the tool is

placed on the workpiece, the disc will reach its normal operat-

ing speed.

Emptying the dustbag

The dustbag should be emptied every 10 minutes.

u Shake the dustbag to empty the contents.

Hints for optimum use (g. E)

u Do not exert too much pressure on the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley KFFMEW440 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info