Bedienungsanleitung Stanley SDR1400 (Seite 7 von 28) (Englisch, Französisch)

720420

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH (Original instructions)

mounting spanner (9) gripping the welded nut (Fig. E).

♦ Loosen the welded nut anticlockwise (Fig. F) and

remove the shaft (4) from the socket (3) (Fig. F)

Stirrer (Fig.G, Fig.H)

♦ Lock the welded nut of the shaft (4) with one mounting

spanner (9) and loosen the stirrer (5) anticlockwise with

another mounting spanner (9) gripping the welded nut

(Fig. G).

♦ Loosen the welded nut anticlockwise (Fig. H) and

remove the stirrer (5) from the shaft (4) (Fig. H).

♦ Attach a new shaft/stirrer as required.

Use

Variable speed switch (Fig.I)

Operate the product either in instant or continuous mode.

Instant Mode

♦ Switch the product on by pressing the variable speed

switch (7) (Fig. I).

♦ Switch the product off by releasing the variable speed

switch (7).

Continuous mode

♦ Switch the product on by pressing the variable speed

switch (7) and hold it in position (Fig. J, step 1).

♦ Press the lock-on button (6) and hold it in position to

lock the variable speed switch (7) (Fig. I, step 2).

♦ Release the lock-on button (6) and variable speed

switch (8). The variable speed switch is now locked on

for continuous use.

♦ Depress and release the variable speed switch (7) to

switch the product off.

General operation

♦ Check the product, its power cord and plug as well as

accessories for damage before each use. Do not use

the product if it is damaged or shows wear.

♦ Double check that the accessories and attachments are

properly fixed.

♦ Always hold the product on its handles. Keep the

handles dry to ensure safe support.

♦ Ensure that the air vents are always unobstructed

and clear. Clean them if necessary with a soft brush.

Blocked air vents may lead to overheating and damage

the product.

♦ Switch the product off immediately if you are disturbed

while working by other people entering the working

area. Always let the product come to complete stop

before putting it down.

♦ Do not overwork yourself. Take regular breaks to

ensure you can concentrate on the work and have full

control over the product.

Mixing (Fig.K)

Warning! During operation fine dust will be generated!

Some dusts are highly inflammable and explosive! Do

not smoke during operation, keep heat sources and open

flames out of the working area! Always wear a dust mask

to protect yourself against hazards resulting from fine

dust! The stirrer will come to a stop during operation if the

material is too firm! Switc h the product off, lift the stirrer

out of the material and inspect the material before using the

product again! A blocked stirrer may cause overheating the

of the motor. Hold the product firmly during operation. Do

not let the stirrer touch the bucket! This can cause damage

to the stirrer and bucket!

♦ Hold the product with 2 hands on both handles (2) and

insert the stirrer (5) into the material (Fig. M).

♦ Gently press variable speed trigger switch to start

operation at a low speed.

♦ Move the stirrer through the material until it is evenly

and completely mixed.

♦ Switch the product off. Let the stirrer come to a

complete stop before lifting it out of the mixing material.

Warning: Switch the product off, let it come to a complete

stop and disconnect it from the power supply if the stirrer

gets stuck in the mixing material. Only then free the

jammed attachment.

After use

Warning: Always switch the product off, disconnect the

product from the power supply and let the product cool

down before performing inspection, maintenance and

cleaning work!

Cleaning

♦ Keep the product clean. Remove debris from it after

each use and before storage.

♦ Regular and proper cleaning will help ensure safe use

and prolong the life of the product.

♦ Inspect the product before each use for worn and

damaged parts. Do not operate it if you find broken and

worn parts.

Warning: Only perform repairs and maintenance work

according to these instructions! All further works must be

performed by a qualified specialist!

♦ Clean the product with a dry cloth. Use a brush for

areas that are hard to reach.

♦ In particular clean the air vents (1) after every use with

a cloth and brush.

♦ Remove stubborn dirt with high pressure air

(max. 3 bar).

Note: Do not use chemical, alkaline, abrasive or other

aggressive detergents or disinfectants to clean this product

as they might be harmful to its surfaces.

♦ Check for worn or damaged parts. Replace worn parts

as necessary or contact an authorised service centre

for repair before using the product again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SDR1400 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info