Bedienungsanleitung Stanley SFMCF900 (Seite 8 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

720809

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

(Original instructions)

Installing and Removing the Battery Pack from

the tool

Warning! Make certain the lock-off button is engaged

to prevent switch actuation before removing or

installing battery.

To install battery pack (Fig. C)

● Insert battery pack rmly into tool until an audible click is

heard as shown in gure C. Ensure battery pack is fully

seated and fully latched into position.

To remove battery pack (Fig. D)

● Depress the battery release button (5) as shown in

gure D and pull battery pack out of tool.

Belt hook (Optional extra) (Fig. E, F)

Warning! To reduce the risk of serious personal

injury, place the forward/reverse button in the lock-off

position or turn tool off and disconnect battery pack

before making any adjustments or removing/installing

attachments or accessories. An accidental start-up

can cause injury.

Warning! To reduce the risk of serious personal

injury, ONLY use the tool’s belt hook (9) to hang the

tool from a work belt. DO NOT use the belt hook (9)

for tethering or securing the tool to a person or object

during use. DO NOT suspend tool overhead or

suspend objects from the belt hook.

Warning! To reduce the risk of serious personal

injury, ensure the screw (10) holding the belt hook

is secure.

Note: When attaching or replacing the belt hook (9), use only

the screw (10) that is provided. Be sure to securely tighten

the screw.

The belt hook (9) can be be attached by sliding into the

slots (8) on either side of the tool using only the screw (10)

provided, to accommodate left- or right- handed users. If the

hook is not desired at all, it can be removed from the tool.

To move the belt hook, remove the screw (10) that holds the

belt hook (9) in place then reassemble on the opposite side.

Be sure to securely tighten the screw (10).

Note: Various trackwall hooks and storage congurations

are available.

Please visit our website www.stanleytools.eu/3 for

further information.

Install accessory (Fig. G)

Warning! Use only impact accessories. Nonimpact

accessories may break and cause a hazardous

condition. Inspect accessories prior to use to ensure

that it contains no cracks.

● To install an accessory (11), rmly push accessory onto

the 12.7 mm hog ring anvil (3) . The hog ring compresses

to allow the accessory to slide on. After the accessory is

installed, the hog ring applies pressure to help provide

accessory retention.

Remove Accessory

● To remove an accessory, grasp the accessory and rmly

pull it off the 12.7 mm hog ring anvil.

Use

Warning! Let the tool work at its own pace. Do

not overload.

Selecting the direction of rotation (Fig. H)

For tightening, use forward (clockwise) rotation. For loosening,

use reverse (counterclockwise) rotation.

● To select forward rotation, push the forward/reverse

slider (2) to the left.

● To select reverse rotation, push the forward/reverse slider

to the right.

● To lock the tool, set the forward/reverse slider into the

centre position.

LED work light

The LED work light (7) is activated automatically when

the trigger is depressed. The LED work light will illuminate

when the trigger is partially depressed, before the unit

begins running.

Maintenance

Your Stanley FatMax tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on

the tool, remove the battery from the tool. Unplug the

charger before cleaning it.

● Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMCF900 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info