Bedienungsanleitung Stanley SFMCL020 (Seite 7 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

720656

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

(Original instructions)

Hot/Cold Pack Delay:

Green LED Intermittent

Red LED Solid

Note: The compatible charger(s) will not charge a faulty

battery pack. The charger will indicate a faulty battery pack by

refusing to light.

Note: This could also mean a problem with a charger. If the

charger indicates a problem, take the charger and battery

pack to be tested at an authorized service centre.

Leaving the battery in the charger

The charger and battery pack can be left connected with the

LED glowing indenitely. The charger will keep the battery

pack fresh and fully charged.

Hot/Cold Pack Delay

When the charger detects a battery that is too hot or too

cold, it automatically starts a Hot/Cold Pack Delay, the green

LED (5a) will ash intermittently, while the red LED (5b) will

remain on continuously, suspending charging until the battery

has reached an appropriate temperature. The charger then

automatically switches to the pack charging mode. This

feature ensures maximum battery life.

Battery state of charge indicator (Fig. B)

The battery includes a state of charge indicator to quickly

determine the extent of battery life as shown in gure B. By

pressing the state of charge button (3a) you can easily view

the charge remaining in the battery as illustrated in gure B.

Installing and Removing the Battery Pack from

the tool

To install battery pack (Fig. C)

● Insert battery pack rmly into tool until an audible click is

heard as shown in gure C. Ensure battery pack is fully

seated and fully latched into position.

To remove battery pack (Fig. D)

● Depress the battery release button (4) as shown in

gure D and pull battery pack out of tool.

Belt hook (Optional extra) (Fig. E, F)

Warning! To reduce the risk of serious personal

injury, ONLY use the tool’s belt hook (6) to hang the

tool from a work belt. DO NOT use the belt hook (6)

for tethering or securing the tool to a person or object

during use. DO NOT suspend tool overhead or

suspend objects from the belt hook.

Warning! To reduce the risk of serious personal

injury, ensure the screw (7) holding the belt hook

is secure.

Note: When attaching or replacing the belt hook (6), use only

the screw (7) that is provided. Be sure to securely tighten

the screw.

The belt hook (6) can be be attached to either side of the tool

using only the screw (6) provided, to accommodate left- or

right- handed users. If the hook is not desired at all, it can be

removed from the tool.

To move the belt hook, remove the screw (7) that holds the

belt hook (6) in place then reassemble on the opposite side.

Be sure to securely tighten the screw (7).

The belt hook (6) can be be attached by sliding into the

slots (8) on either side of the tool using only the screw (7)

provided, to accommodate left- or right- handed users. If the

hook is not desired at all, it can be removed from the tool.

To move the belt hook, remove the screw (7) that holds the

belt hook (6) in place then reassemble on the opposite side.

Be sure to securely tighten the screw (7).

Note: Various trackwall hooks and storage congurations are

available.

Please visit our website www.stanleytools.eu/3 for

further information.

Switching on and off (Fig. G)

● To switch the torch on press in the switch (1)

● To switch the torch off press in the switch (1)

The pivoting lens (Fig. G)

● For your convienience, the lens (2) can be pivoted into a

range of positions.

Maintenance

Your STANLEY FATMAX tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on

the tool, remove the battery from the tool. Unplug the

charger before cleaning it.

● Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMCL020 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info