Bedienungsanleitung Stanley SFMCS600 (Seite 10 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch, Alle Sprachen)

720703

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

(Original instructions)

● When cutting thin sheet metal, clamp a piece of scrap

wood to the back surface of the workpiece and cut through

this sandwich.

● Spread a lm of oil along the intended line of cut.

Accessories

The performance of your tool depends on the accessory used.

STANLEY FATMAX accessories are engineered to high quality

standards and designed to enhance the performance of your

tool. By using these accessories you will get the very best

from your tool.

This tool is suitable both for U-shank and T-shank saw blades.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance,

switch off and unplug the tool.

● Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

● Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

● Occasionally apply a drop of oil to the axle of the blade

support roller.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

● Safely dispose of the old plug.

● Connect the brown lead to the live terminal in the

new plug.

● Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth

terminal. Follow the tting instructions supplied with

good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. Products and batteries marked

with this symbol must not be disposed of with

normal household waste.

Products and batteries contain materials that can be

recovered or recycled reducing the demand for raw materials.

Please recycle electrical products and batteries according to

local provisions. Further information is available at

www.2helpU.com

Technical data

SFMCS600 (H1)

Voltage

No-load speed

min

-1

0 - 2500

Stroke length

mm 19

Max depth of cut

Wood

mm 55

Steel

mm 8

Aluminium

mm 20

Weight kg

2.62

Charger SFMCB11 SFMCB12 SFMCB14

Input Voltage

230 230 230

Output Voltage

18 18 18

Current A 1.25 2 4

Battery SFMCB201 SFMCB202 SFMCB204 SFMCB206

Voltage

18 18 18 18

Capacity Ah 1.5 2.0 4.0 6.0

Type Li-Ion Li-Ion Li-Ion Li-Ion

Level of sound pressure according to EN62841:

Sound pressure (L

) 82 dB(A), uncertainty (K) 5 dB(A)

Sound power (L

) 93 dB(A), uncertainty (K) 5 dB(A)

Vibration total values (triax vector sum) according to EN62841:

Cutting boards (a

h, B

) 4.9 m/s

, uncertainty (K) 1.5 m/s

Cutting sheet metal (a

h, M

) 8.8 m/s

, uncertainty (K) 1.5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMCS600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info