720561
8
Zoom out
Zoom in
Vorherige Seite
1/146
Nächste Seite
6
ENGLISH
d ) When not in use, store the machine out of the reach
ofchildren.
e ) Use blade cover for metal blades during transport
andstorage.
f ) Clean before storing, including the use of guards on
cutting attachments with metalblades.
ADDITIONAL SAFETY INSTRUCTIONS FOR
GRASS TRIMMERS
WARNING: Cutting elements continue to
rotate after the motor is switchedoff.
Wear long trousers to protect yourlegs.
Before using the appliance, check that your cutting path is free
from sticks, stones, wire and any otherobstacles.
Only use the appliance in the upright position, with the cutting
line near the ground. Never switch the appliance on in any
otherposition.
Move slowly when using the appliance. Be aware that freshly
cut grass is damp andslippery.
Do not work on steep slopes. Work across the face of slopes,
not up anddown.
Never cross gravel paths or roads while the appliance
isrunning.
Never touch the cutting line while the appliance isrunning.
Do not put the appliance down until the cutting line has come
to a completestandstill.
Use only the appropriate type of cutting line. Never use metal
cutting line or fishingline.
Keep hands and feet away from the cutting line and blade at
all times, especially when switching on themotor.
Before using the appliance and after any impact, check for
signs of wear or damage and repair asnecessary.
Take care against injury from any device fitted for trimming
the filament line length. After extending new cutter line always
return the machine to its normal operating position before
switchingon.
Close supervision is necessary when the appliance is used
nearchildren.
This appliance is not intended for use by young or infirm
persons withoutsupervision.
This appliance is not to be used as atoy.
Use in a dry location only. Do not allow the appliance to
becomewet.
Do not immerse the appliance inwater.
Do not open the body casing. There are not user-serviceable
parts inside
Do not operate the appliance in explosive atmospheres, such
as in the presence of flammable liquids, gases ordust.
When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed ordirection.
When not in use, the appliance should be stored in a dry, well
ventilated place out of reach ofchildren.
Children should not have access to storedappliances.
Safety of Others
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for theirsafety.
Children must be supervised to ensure that they do not play
with theappliance.
Residual Risks
To ensure you have good footing on slopes, do not overreach.
Keep your balance at all times. Always walk, do notrun.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These risks
can arise from misuse, prolonged useetc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
Injuries caused by touching any rotating/movingparts.
Injuries caused when changing any parts, blades
oraccessories.
Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regularbreaks.
Impairment ofhearing.
Health hazards caused by breathing dust developed when
using your tool (example: working with wood, especially oak,
beech and MDF.)
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of yourmains.
Your STANLEYFATMAX charger is double insulated
in accordance with EN60335; therefore no earth wire
isrequired.
WARNING: 115 V units have to be operated
via a fail-safe isolating transformer with an earth screen
between the primary and secondary winding.
If the supply cord is damaged, it must be replaced by a specially
prepared cord available through the STANLEYFATMAX
serviceorganisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
Safely dispose of the oldplug.
Connect the brown lead to the live terminal in theplug.
Connect the blue lead to the neutralterminal.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stanley SFMCST933 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info