Bedienungsanleitung Stanley SFMEH220 (Seite 5 von 64) (Alle Sprachen)

720440

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

(Original instructions)

u Children should be supervised to ensure that they do not

play with the appliance.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving parts.

u Injuries caused when changing any parts, blades or ac-

cessories.

u Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

u Impairment of hearing.

u Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially

oak, beech and MDF.)

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool , along with

the date code:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Wear safety glasses or goggles.

Wear ear protection.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Stanley Fat Max Service

Centre in order to avoid a hazard.

Using an extension cable

Always use an approved extension cable suitable for the

power input of this appliance (see technical data).

The extension cable must be suitable for outdoor use and

marked accordingly. Up to 30 m of 1.5 mm2 HO5VV-F exten-

sion cable can be used without loss of product performance.

Before use, inspect the extension cable for signs of damage,

wear and ageing. Replace the extension cable if damaged or

defective. When using a cable reel, always unwind the cable

completely.

Features

This tool includes some or all of the following features.

1. Side handle

2. Switch

3. Barrel cover

4. SDS MAX Chuck

5. Lube oil-injection inlet

Use

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged.

Switching on and off (Fig. A)

u To run the tool, press the switch (2) and turn it in 'ON'

position.

u To stop the tool, turn it in 'OFF' position and release the

switch (2).

Fitting the side handle (Fig. B)

The side handle (1) can be tted to suit both RH- and

LH-users.

Warning! Do not use the tool without the side

handle properly assembled.

u Loosen the side handle.

u For RH-users: Slide the side handle clamp over the

collar behind the tool holder, handle at the left. For

LH-users: Slide the side handle clamp over the collar

behind the tool holder, handle at the right.

u Rotate the side handle to the desired position and

tighten the handle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMEH220 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info