Bedienungsanleitung Stanley SGT-51-820-H (Seite 4 von 20) (Englisch)

720569

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• Allow the motor to cool off before storing it in any

enclosed space.

• To reduce risk of fire, keep the storage area for

the machine, tail pipe and gasoline free of any

vegetation or excess lubricant.

• Replace any worn or damaged parts as a measure

of safety.

• If the fuel tank must be drained, it must be done

outdoors. Handle fuel in an environmentally safe

manner.

• The fuel tank must be drained every time the tiller

is moved.

• To reduce the effects of machine vibrations, wear

protective gloves when operating it.

• Be sure to take breaks after every 30-minute

period of work to avoid Hand Arm Vibration

Syndrome.

PRELIMINARY MEASURES:

When working, always wear stable shoes and long

pants.

Never operate the machine when barefoot or when

wearing light sandals.

Inspect the entire terrain on which you will be

operating the equipment and remove any objects

that could be thrown by the machine.

CAUTION!

– Gasoline is extremely flammable!

Store gasoline only in containers that are designed

for this purpose. Fill it up only in the open air and do

not smoke when filling it.

Fill the tank with gas before starting the motor. Do

not open the gas tank closure plug or fill it with

gasoline while the motor is operating, or when the

motor is hot.

If the gasoline overflows, do not attempt to start up

the motor for any reason.

Instead, remove the equipment from the area

where the gas has been spilled. Then, avoid all

attempts to start up the machine until all gasoline

vapors have evaporated

Replace any damaged tailpipes.

Before use, always visually inspect for worn or

damaged parts. If there are any worn or damaged

parts, or fastening bolts, the entire set must be

replaced.

HANDLING:

The engine must not be operated in enclosed

areas in which carbon monoxide, a dangerous

substance, could become concentrated.

Operate this machine only in daylight or with

proper lighting. Be sure that you keep the unit

balanced on its stands.

Do not operate the machine faster than you can

walk.

For wheeled machines: Work transversely relative

to the slope, never when climbing or descending.

Pay particular attention when you are changing

direction on a slope.

Be especially careful when you are making a

U-turn with the machine or when you are pulling it

towards you.

Never change the motor base adjustment or make

it run too quickly.

Use caution when starting up the motor, in

compliance with the manufacturer’s instructions

and be sure to keep a sufficient distance between

your feet and the tool or tools.

Never put your hands or feet on or under rotating

parts.

Never lift or carry a machine when its motor is

running.

Always shut off the motor before filling the fuel

tank with gasoline. When the motor is running

unloaded, be sure to close the flow restrictor.

If the machine has a gasoline shutoff valve, it must

be closed after any intervention

For safety reasons, the motor rotation speed must

not exceed the data indicated on the power plate.

Always use two persons to transport or store the

power tiller. Do not carry it all by yourself.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SGT-51-820-H Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info