Bedienungsanleitung Stanley SGV115 (Seite 6 von 28) (Englisch, Französisch)

720764

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH (Original instructions)

Additional Safety Information

• Do not use Type 11 (ﬂaring cup) wheels on this tool.

Using inappropriate accessories can result in injury.

• Always use side handle. Tighten the handle securely.

The side handle should always be used to maintain control

of the tool at all times.

• Use clamps or another practical way to secure and

support the work piece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

Safety warnings speciﬁc for grinding

a. Use only wheel types that are recommended for your

power tool and the speciﬁc guard designed for the

selected wheel. Wheels for which the power tool was not

designed cannot be adequately guarded and are unsafe.

b. The grinding surface of the centre depressed wheels

must be mounted below the plane of the guard lip. An

improperly mounted wheel that projects through the plane

of the guard lip cannot be adequately protected.

c. The guard must be securely attached to the power

tool and positioned for maximum safety, so the least

amount of wheel is exposed towards the operator. The

guard helps to protect the operator from broken wheel

fragments, accidental contact with wheel and sparks that

could ignite clothing.

d. Wheels must be used only for recommended

applications. For example: do not grind with the side

of cut-off wheel. Abrasive cut-off wheels are intended for

peripheral grinding, side forces applied to these wheels

may cause them to shatter.

e. Always use undamaged wheel ﬂanges that are of

correct size and shape for your selected wheel. Proper

wheel ﬂanges support the wheel thus reducing the

possibility of wheel breakage. Flanges for cut-off wheels

may be different from grinding wheel ﬂanges.

f. Do not use worn down wheels from larger power

tools. Wheel intended for larger power tool is not suitable

for the higher speed of a smaller tool and may burst.

Personal safety

• No children or pregnant women should enter the work rea

where the paint sanding is being done until all cleanup is

completed.

• A dust mask or respirator should be worn by all persons

entering the work area. The ﬁlter should be replaced daily

or whenever the wearer has difﬁculty breathing.

Note: only those dust masks suitable for working with lead paint

dust and fumes should be used. Ordinary painting masks do not

offer this protection. See your local hardware dealer for the NIOSH

approved proper mask.

Environmental safety

• Paint should be removed in such a manner as to minimize

the amount of dust generated.

• Areas where paint removal is occurring should be sealed

with plastic sheeting of 4 mils thickness.

• Sanding should be done in a manner to reduce tracking of

paint dust outside the work area.

Labels on tool

The label on your tool may include the following symbols:

Position of Date Code (Fig. A)

The Date Code (10), which also includes the year of

manufacture, is printed into the housing.

Example:

2017 XX JN

Year of manufacturing

Package Contents

The package contains:

1 Angle Grinder

1 Guard

1 Flange set

1 Spanner

1 Handle

1 Instruction Manual

• Check for damage to the tool, parts or accessories which

may have occurred during transport.

• Take the time to thoroughly read and understand this

manual prior to operation.

Electrical Safety

Your tool is double insulated; therefore no earth

wire is required. Always check that the main voltage

corresponds to the voltage on the rating plate.

Warning! If the power cord is damaged, it must be

replaced by the manufacturer, authorized Stanley

Service Center or an equally qualiﬁed person in

order to avoid damage or injury. If the power cord is

replaced by an equally qualiﬁed person, but not

authorized by Stanley, the warranty will not be valid.

WARNING! To reduce the risk of injury, the user

must read the instruction manual before use.

Wear ear protection.

Wear safety glasses or goggles.

V Volts

Direct Current

A Amperes n

No-Load Speed

Hz Hertz

Class II Construction

W Watts

Earthing Terminal

min minutes

Safety Alert Symbol

Alternating

Current

/min.

Revolutions or

Reciprocation per

minute

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SGV115 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info