Bedienungsanleitung Stanley SRS480 (Seite 6 von 20) (Englisch, Französisch)

720730

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH (Original instructions)

Using an extension cable

♦ Always use an approved extension cable suitable for

the power input of this tool (see technical data). Before

use, inspect the extension cable for signs of damage,

wear and ageing. Replace the extension cable if

damaged or defective. When using a cable reel, always

unwind the cable completely. Use of an extension cable

not suitable for the power input of the tool or which is

damaged or defective may result in a risk of fire and

electric shock.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Dust extraction outlet

5. Sanding base

Assembly

Warning! Before assembly, make sure that the

tool is switched off and unplugged.

Fitting the sanding disc (fig.A)

♦ Place the tool on a table, with the spindle facing up.

♦ Place the sanding disc (5) onto the spindle.

♦ Secure the sanding disc using the screws (6).

Fitting sanding sheets (fig. B)

Warning! Never use the tool without a sanding sheet or

accessory in place.

♦ Press the sheet firmly and evenly onto the sanding disc

(5), making sure that the holes in the sheet line up with

the holes in the base.

Fitting and removing the dustbag (fig. C)

♦ Fit the dustbag (7) over the dust extraction outlet (4).

♦ To remove the dustbag, pull it off the dust extraction

outlet.

Connecting a vacuum cleaner (fig. D)

♦ Insert the hose (8) of the vacuum cleaner into the dust

extraction outlet (4).

Use

Warning! Let the tool work at its own pace. Do not

overload.

Variable speed control

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

♦ Set the control knob (3) to the desired setting. Use a

high speed for wood, medium speed for veneer and

synthetics and low speed for acrylic glass, non-ferrous

metals and for removing paints.

Switching on and off

♦ To switch the tool on, press the on/off switch (1).

♦ For continuous operation, press the lock-on button (2)

and release the on/off switch..

♦ To switch the tool off, release the on/off switch. To

switch the tool off when in continuous operation, press

the on/off switch once more and release it.

Automatic brake system

This feature keeps the speed of the disc limited as long as

the tool does not touch the workpiece. As soon as the tool

is placed on the workpiece, the disc will reach its normal

operating speed.

Emptying the dustbag

The dustbag should be emptied every 10 minutes.

♦ Shake the dustbag to empty the contents.

Hints for optimum use (Fig. E)

♦ Do not exert too much pressure on the tool.

♦ Regularly check the condition of the sanding sheet.

Replace when necessary.

♦ Always sand with the grain of the wood.

♦ When sanding new layers of paint before applying

another layer, use extra fine grit.

♦ On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start

with a medium grit. In both cases, gradually change to a

fine grit for a smooth finish.

♦ Consult your retailer for more information on available

accessories.

Accessories

The performance of your tool depends on the accessory

used. STANLEY accessories are engineered to high quality

standards and designed to enhance the performance of

your tool. By using these accessories you will get the very

best from your tool.

Maintenance

Your tool has been designed to operate over a long period

of time with a minimum of maintenance. Continuous

satisfactory operation depends upon proper tool care and

regular cleaning.

Warning! Before performing any maintenance,

switch off and unplug the tool.

♦ Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

♦ Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SRS480 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info