Bedienungsanleitung Stanley SSJ0650 (Seite 6 von 24) (Englisch, Französisch)

720704

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Fittingthesawblade(Fig.B)

• Hold the saw blade with the teeth facing forward.

• Push and hold the blade clamp (3) upward.

• Insert the shank of the saw blade into the blade holder as

far as it will go.

• Release the blade clamp (3).

Use

Adjusting the shoe plate for bevel cuts (Fig. C)

Warning! Never use the tool when the shoe

plate is loose or removed.

The shoe plate (6) can be set to a left or right bevel angle of

up to 45°.

• Pull the shoe plate locking lever (7) outwards to unlock the

shoe plate (6) from the 0 deg position.

• Pull the shoe plate (6) forward and set the required bevel

15°, 30° and 45° indicated in the bevel angle window.

• Push the shoe plate locking lever (7) back towards the

saw to lock the shoe plate (6).

To reset the shoe plate (6) for straight cuts:

• Pull the shoe plate locking lever (7) outwards to unlock the

shoe plate (6).

• Set the shoe plate (6) to an angle of 0º and push the shoe

plate backwards.

• Push the shoe plate locking lever (7) back towards the

saw to lock the shoe plate (6).

Fitting and removing the shoe sleeve (fig. F)

The non scratch shoe sleeve (5) should be used when

cutting surfaces that scratch easily, such as laminate,

veneer, or paint. It can also be used to protect the shoe

surface during transportation and storage.

To attach shoe sleeve:

• Place the front of the shoe plate (6) into the front of the

shoe sleeve (5).

• Lower the tool into the shoe sleeve (5). The shoe sleeve

will click securely onto the rear of the shoe.

To remove shoe sleeve:

• Grasp the shoe sleeve from the bottom at the two rear

tabs and pull down and away from the shoe plate (6).

Cutting action (fig. E)

This jig saw is equipped with four cutting actions, three

orbital and one straight. Orbital action has a more

aggressive blade motion and is designed for cutting in soft

materials like wood or plastic. Orbital action provides a

faster cut, but with a less smooth cut across the material. In

orbital action, the blade moves forward during the cutting

stroke in addition to the up and down motion..

Warning! Metal or hardwoods should never be

cut in orbital action.

• Move the cutting action lever (9) between the four cutting

positions: 0, 1, 2, and 3..

• Position 0 is straight cutting.

• Positions 1, 2, and 3 are orbital cutting.

• The aggressiveness of the cut increases as the lever is

adjusted from one to three, with three being the most

aggressive cut.

Variable speed control (fig. D)

Thevariablespeedon/offswitchoffersachoiceofspeeds

for greatly improved cutting rates in various materials.

• To set the speed, turn the variable speed control (8) to the

required setting.

Switching on and off

• Toswitchthetoolon,presstheon/offswitch(1).

• Toswitchthetooloff,releasetheon/offswitch(1).

• For continuos operation, press the lock-on button (2) and

 releasetheon/offswitch(1).

• To switch the tool off when in continuous operation, press

 theon/offswitch(1)andreleaseit.

Sawing

Holdthetoolrmlywithbothhandswhilecutting.Theshoe

plate(6)shouldbeheldrmlyagainstthematerialbeingcut.

This will help prevent the saw from jumping, reduce vibration

and minimise blade breakage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SSJ0650 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info