720594
16
Zoom out
Zoom in
Vorherige Seite
1/240
Nächste Seite
16
- Attach the cutting guard (15) with the 4 screws
on the retaining device on the shank (if not
already fitted). In addition, the protective cover
must be fitted with the blade at the cutting guard.
- Lock the shaft of the brush cutter at the required
position with a screwdriver or with the Allen key
(28).
- Loose with the spark plug wrench (29) the
locknut for the blade (14), by turning in a
clockwise direction (if already installed).
- Remove the hexagon nut (14), the clamping
flange (13) and the retaining plate (16) for the
thicket of knives. Keep these parts sage.
- Leave the support flange (17) on the shaft.
- Lock the shaft of the brush cutter at the required
position with a screwdriver or with the supplied
Hex Key (28).
- Rotate the thread spool (19) against the
clockwise on the shaft.
ATTENTION: Left hand thread
Connect the drive unit and assembly:
Put the ends of the modules to be connected
into one another. While doing so, make sure that
the lock pin (26) is snapped in place. Check by a
pulling apart by way of trial. Fold down the (26a)
cover and secure the modules by tightening the
locking screw (10).
Release of the drive unit and assembly:
Release the locking screw (10). The cover (26a)
jumps back. Hold the locking pin (26)found below
the cover pressed down and and at the same
time release the modules from one another by
carefully pull apart.
A7
G
B
10
26a
26
29
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stanley STR-4 in 1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info