Bedienungsanleitung Stanley STSJ0600 (Seite 7 von 11) (Englisch)

622183

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

Fitting the saw blade (Fig. C)

• Hold the saw blade (10) as shown, with the teeth facing

forward.

• Push and hold the blade clamp (11) down.

• Insert the shank of the saw blade into the blade holder

(12) as far as it will go.

• Release the blade clamp (11).

Saw blade storage (Fig. D)

Saw blades (10) can be stored in the storage compartment

(4) located on the side of the tool.

• Open the cover of the saw blade storage compartment

(4) by holding the tab on the top of the cover and pulling

it outward.

• The blades are retained in the compartment by a

magnetic strip. To remove a blade, press down on one

end of the blade to raise the other end, and remove.

• Close the cover of the saw blade storage compartment

(4) and make sure that it is latched closed.

Warning! Close the storage compartment door

securely before operating the saw.

Connecting a vacuum cleaner to the tool (Fig. E)

An adaptor (13) is required to connect a vacuum cleaner or

dust extractor to the tool.

• Push the adaptor (13) into the dust extraction outlet (6).

• Connect vacuum cleaner hose (14) to the adaptor (13).

Cut line blower (Fig. F)

• To aid visibility when cutting, your jigsaw is equipped

with a cut line blower (15) which will keep the work area

clear of dust as you saw.

Use

Adjusting the shoe plate for bevel cuts (Fig. G and H)

Warning! Never use the tool when the shoe plate

is loose or removed.

The shoe plate (7) can be set to a left or right bevel angle of

up to 45°.

• Pull the shoe plate locking lever (5) outwards to unlock

the shoe plate (7) from the 0 deg position.

• Pull the shoe plate (7) forward and set the required bevel

15°, 30° and 45° indicated in the bevel angle window.

• Push the shoe plate locking lever (5) back towards the

saw to lock the shoe plate (7).

To reset the shoe plate (7) for straight cuts:

• Pull the shoe plate locking lever (5) outwards to unlock

the shoe plate (7).

• Set the shoe plate (7) to an angle of 0º and push the

shoe plate backwards.

• Push the shoe plate locking lever (5) back towards the

saw to lock the shoe plate (7).

Setting the pendulum stroke (Fig. I)

• Set the pendulum stroke selector (9) to the required

position.

• Position 0: metal and aluminium and sheet metal.

• Position I: for laminates, hard wood, work tops.

• Position II: for plywood and PVC/Plastics.

• Position III: for soft wood and fast cutting.

Variable speed control

• Set the variable speed control knob (1) to the required

speed range.

• Use a high speed for wood, medium speed for

aluminium and PVC and low speed for metals other than

aluminium.

Switching on and off

• To switch the tool on, press the on/off switch (2).

• To switch the tool off, release the on/off switch (2).

• For continuos operation, press the lock-on button (3) and

release the on/off switch (2).

• To switch the tool off when in continuous operation,

press the on/off switch (2) and release it.

Sawing

Hold the tool ﬁrmly with both hands while cutting. The shoe

plate (7) should be held ﬁrmly against the material being cut.

This will help prevent the saw from jumping, reduce vibration

and minimise blade breakage.

(Original instructions)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley STSJ0600 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stanley STSJ0600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info