Bedienungsanleitung Stanley STSJ0600 (Seite 6 von 44) (Französisch, Portugiesisch)

622183

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

• Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

• Keep hands away from cutting area. Never reach

underneath the work piece any reason. Do not insert

ﬁngers or thumb into the vicinity of the reciprocating

blade and blade clamp. Do not stabilize the saw by

gripping the shoe.

• Keep blades sharp. Dull or damaged blades may cause

the saw to swerve or stall under pressure. Always use

the appropriate type of saw blade for the workpiece

material and type of cut.

• When cutting pipe or conduit, make sure that they

are free from water, electrical wiring, etc.

• Do not touch the workpiece or the blade immediately

after operating the tool. They can become very hot.

• Be aware of hidden hazards, before cutting into

walls, ﬂoors or ceiling, check for the location of

wiring and pipes.

• The blade will continue to move after releasing the

switch. Always switch the tool off and wait for the saw

blade to come to a complete standstill before putting the

tool down.

Warning! Contact with, or inhalation of dusts arising

from cutting applications may endanger the health

of the operator and possible bystanders. Wear a

dust mask speciﬁcally designed for protection against dust

and fumes and ensure that persons within or entering the

work area are also protected.

• This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure

that they do not play with the appliance.

• The intended use is described in this instruction manual.

The use of any accessory or attachment or perfor mance

of any operation with this tool other than those

recommended in this instruction manual may present a

risk of personal injury and/or damage to property.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

• Injuries caused by touching any rotating/moving parts.

• Injuries caused when changing any parts, blades or

accessories.

• Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

• Impairment of hearing.

• Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF.)

Features (Fig. A)

1. Variable speed control knob

2. On/off switch

3. Lock-on button

4. Blade storage compartment cover

5. Shoe plate locking lever

6. Dust extraction outlet

7. Shoe plate

8. Saw blade support roller

9. Pendulum stroke selector

Additional features (Fig. A)

Additional features may be applicable depending upon the

product purchased. The additional features applicable to the

catalogue number purchased are shown in Fig. A.

Assembly

Warning! Before attempting any of the following

operations, make sure that the tool is switched off

and unplugged and that the saw blade has

stopped. Used saw blades may be hot.

Fitting and removing the saw blade (Fig. C and D)

Warning! Before attempting any of the following

operations, make sure that the tool is switched off

and unplugged and that the saw blade has

stopped. Used saw blades may be hot.

(Original instructions)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley STSJ0600 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stanley STSJ0600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info