Bedienungsanleitung Stanley SXVC20PTE (Seite 11 von 232) (Alle Sprachen)

722581

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

10 11

(Original instructions)

4 GENERAL INFORMATION (PAGE 3)

4.1 Use of the manual

This manual forms an integral part of the appliance and should be kept

for future reference. Please read it carefully before installing/using the

unit. If the appliance is sold, the seller must pass on this manual to the

new owner along with the appliance.

4.2 Delivery

The appliance is delivered partially assembled in a cardboard box.

The supply package is illustrated in fig.1.

4.2.1 Documentation supplied with the appliance

D1 Use and maintenance manual

D2 Safety instructions

D3 Declaration of conformity

D4 Warranty regulations

4.3 Disposing of packaging

The packaging materials are not environmental pollutants but must still

be recycled or disposed of in compliance with the relevant legislation

in the country of use.

5 TECHNICAL INFORMATION (PAGE 3)

5.1 Intended use

The appliance is intended for use as a multi-purpose vacuum

cleaner, in compliance with the descriptions and safety

precautions contained in these instructions.

This appliance is designed for household use only and must

not be utilised for industrial or commercial purposes.

The appliance conforms to the IEC 60335-1 and IEC 60335-2-2

standards.

5.2 Operator

The symbol shown in fig. 1 identifies the appliance’s intended operator

(professional or non-professional)

5.3 Main components:

A1 Starter device

A2 Suction connection

A3 Blower connection

A4a Handle

A4b Metal handle (where featured)

A5 Power cable stowing hook (where featured)

A6 Catches

A7 Power cable with plug

A8a Front castor wheels

A8b Rear wheels

A9 Vacuum cleaner tank

A10 Cover with motor

A11 Accessories holder (where featured)

A12 Liquid drain plug (where featured)

A13 Rear wheel axle (where featured)

C1 Power tool socket (where featured)

5.3.1 Accessories (see fig. 1 for details of models - supply

package is as shown on the cardboard box)

Filter holder

Cartridge filter

Hose

Adaptor for power tools

Tube

Floor brush

Carpet - upholstery brush

Crevice nozzle

Round brush

B10

Fabric filter bag (Optional).

B11

Paper filter bag

B12

Tube hook

B13

Combined floor brush

5.4 Safety devices

- Starter device (A1)

The starter device prevents accidental use of the appliance.

6 INSTALLATION (PAGE 4-5)

Warning - danger!

All installation and assembly operations must be performed with the appliance

disconnected from the mains power supply.

The assembly sequence is illustrated on page 4.

6.1 Assembly

When unpacking, check for any missing accessories or damage to the

contents. If damage caused in transit is found, notify your dealer at

once.

Lift the cover with the motor (A10) off the appliance, releasing the

catches (A6) and take out the accessories supplied, checking that the

lter (B2) is tted correctly.

See fig. 2

The assembly sequence is illustrated one pages 4-5.

6.2

Fitting the rear wheels and front castor wheels

Turn the vacuum cleaner tank (A9), with the cover off, upside down

on a firm horizontal surface. Fit the castor wheel hubs (A8a) into

the holes provided and press fully down to secure the wheels in the

correct position.

Fit the axle (A13) correctly, turning it until the aligner holes mate with

the locator pins. Fit the retainers supplied in the bag (B17) and fix them

in place with the screws provided. Fit the wheel (A8b) and the washer

and secure with the split pin, taking care to insert it fully and open it

out so that it fits flush against the cross-section of the axle. Then fit

the wheel guard and repeat the procedure for the other wheel (A8b).

Fit the metal handle (A4b) as shown in the diagram.

See fig. 3

6.3 Fitting the accessories

Connect the hose (B3) to the suction (A2) or the blower connection

(A3) depending on the type of operation required.

See fig. 4

Then complete the sequence with the accessories required for the

type of cleaning job planned. Use the tubes (B5) and the brushes

(B6-B7-B8-B9) depending on the type of cleaning and the surface

to be cleaned. The brushes (B6-B7-B8-B9-B13) can be fitted straight

onto the hose (B3).

See fig. 5

6.4 Electrical connection

Warning - danger!

Check that the electricity supply voltage and frequency (V/Hz)

correspond to those specified on the data plate See fig.6

6.4.1 Use of extension cables

Use cables and plugs with "IPX4" protection level.

The cross-section of the extension cable should be

proportionate to its length; the longer it is, the greater its

cross-section should be.

6.5

Power tool socket (where featured)

Connect the hose (B3) to the power tool’s suction connection. If the

two connections are not compatible, use the adaptor for power tools

(B4) (where featured) cutting off the surplus.

Operate the power tool using the additional socket (C1) (For models

with this feature)

See fig. 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SXVC20PTE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info