Bedienungsanleitung Stanley TLM220i - 77.116 (Seite 6 von 22) (Englisch)

622316

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

FIN

RUS

EST

Stanley TLM 220i 773938a en

Safety Instructions



WARNING:

Flat batteries must not be disposed of with household waste. Care

for the environment and take them to the collection points provided in

accordance with national or local regulations.

The product must not be disposed of with household waste.

Dispose of the product appropriately in accordance with the

national regulations in force in your country.

Always prevent access to the product by unauthorised

personnel.

Electromagnetic Compatibility (EMC)

The term "electromagnetic compatibility" is taken to mean the capability of

the product to function smoothly in an environment where

electromagnetic radiation and electrostatic discharges are present, and

without causing electromagnetic interference to other equipment.



WARNING:

The Stanley TLM conforms to the most stringent requirements of

the relevant standards and regulations. Yet, the possibility of it causing

interference in other devices cannot be totally excluded.



CAUTION:

Never attempt to repair the product yourself. In case of damage,

contact the local dealership.

FCC statement (applic. in U.S.)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help



WARNING:

Changes or modifications not expressly approved by Stanley for

compliance could void the user’s authority to operate the equipment.

Laser classification

Integrated distancemeter

The Stanley TLM produces a visible laser beam which emerges from the

front of the instrument.

It is a Class 2 laser product in accordance with:

• IEC60825-1 : 2007 "Radiation safety of laser products"

Laser Class 2 products:

Do not stare into the laser beam or direct it towards other people

unnecessarily. Eye protection is normally afforded by aversion responses

including the blink reflex.



WARNING:

Looking directly into the beam with optical aids (e.g. binoculars,

telescopes) can be hazardous.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley TLM220i - 77.116 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stanley TLM220i - 77.116

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info