Bedienungsanleitung StarTrac 4550 Series - Turbo Trainer (Seite 22 von 32) (Englisch)

618992

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

| TURBO TRAINER Manufactured by STAR TRAC OWNER’S MANUAL

Instructions

Your Turbo Trainer air bike is easy to use. There are no resistance knobs to adjust as the resistance comes from the isokenetic

resistance created by the movement of air with the fan-shaped flywheel. Control over the resistance is obtained by simply varying the

pace of pedaling and of the push / pull on the movement arms. Typically, exercising at a slower pace generates a lower resistance from

the flywheel, enabling a cardiovascular endurance workout that can be sustained for extended periods of time. Higher pace exercise

involving faster pedaling and more forceful pushing / pulling on the movement arms creates a greater resistance level that will deliver a

greater muscle endurance or anaerobic workout. Anaerobic exercise and High Intensity Interval Training (HIIT) are much more strenuous

forms of exercise that should only be undertaken by users that have established a baseline fitness level capable of adapting to this form

of exercise. Users are also encouraged to discuss their health program or fitness regimen with their healthcare professional.

Additionally, the bike can be operated with only the use of the movement arms for an upper-body-only workout. The front foot platforms,

located on either side of the flywheel are to be used when exercising only with the movement arms. Position feet securely on these

platforms while pushing / pulling on the movement arms.

NOTE: that the pedals will continue to rotate when the bike is used with the movement arms only. Be certain to maintain feet on the front

foot platforms when exercising with the movement arms only so that feet stay clear of the rotating pedals.

Seat Adjustments

Proper bike setup gives you a more comfortable ride and reduces your risk of injury.

To adjust the seat height:

Dismount the bike. Pull out on the seat height pop-pin to release it from its current preset location, while holding the seat with one hand.

Raise or lower the seat to the desired height, then gently release the pop-pin. Raise or lower the seat slightly, if necessary, until the

pop-pin engages a preset hole. The seat adjustment mechanism for the bike is designed to ratchet upwards without the need to pull out

on the pop-pin, if desired seat height is known then this is an easy method to adjust the seat. Note that the ratcheting method only

works when raising the seat height. In order to lower the seat height, pulling out on the pop-pin is required.

SEAT HEIGHT

At the proper height, there should be a slight bend in your knee when you’re at the bottom of a pedal stroke.

FORE/AFT POSITION

Once the proper height has been achieved, adjust the seat forward or back so that when the feet are in the 3 o'clock and 9 o'clock

positions, the forward knee is directly over the pedal axle. Recheck the seat height again after making the fore/aft adjustment, as

moving the seat forward and backward can have the same effect as moving it higher or lower.

Seat Height Pop-

Fore/Aft Pop-Pin

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

StarTrac 4550 Series - Turbo Trainer Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info