Bedienungsanleitung StarTrac E-ST 5090 Stepper (Seite 17 von 28) (Englisch)

619138

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

The Information Window also displays important instructions and cues throughout the workout.

The Upper and Lower Data Information Windows

also display information during a workout.

To view workout data during your workout:

1. Press the Upper Data Information Window SCROLL key to view the following workout data (the current data display is indicat-

ed by an LED next to the parameter name):

n CALORIES - Shows your aggregate caloric expenditure thus far in your workout.

n CAL/HR - Shows your current caloric expenditure per hour based on your current difficulty level and stepping rate.

n WATTS - Shows your current watts expenditure at that specific time during your workout.

NOTE: Press the SCROLL key to toggle between data during your workout.

2. Press the Lower Data Information Window SCROLL key to view the following workout data (the current data display is indicat-

ed by an LED next to the parameter name):

n DISTANCE - Shows the total number of vertical feet or meters you have climbed thus far.

n SPEED - Shows the speed at which you are currently stepping, in steps-per-minute.

n METS - Shows your current METS expenditure at that specific time during your workout.

PAUSE MODE

If you come to a complete stop during your workout (SPM is less than 10), the Stepper will enter a “pause” mode. To continue your work-

out, begin stepping before the “pause” time expires and your workout data will not be lost.

COOLDOWN CYCLE

Once you have completed your workout, the Stepper enters a two-minute Cooldown cycle.

NOTE: The Stepper software is programmed to properly decrease difficulty level to provide a cooldown.

To operate the Stepper during Cooldown:

1. You can adjust the difficulty LEVEL during Cooldown.

n Use the keys to enter a difficulty LEVEL (from 1 to 20); or press the or key, as desired, to increase or

decrease the difficulty LEVEL in 1 unit increments.

n When the desired difficulty LEVEL has been entered by using the keys, press the key to accept the displayed

LEVEL.

2. When the Cooldown cycle ends, your workout summary displays in the Information Window. If you wish to exit the Cooldown

cycle before it ends automatically, stop stepping.

USING THE PERSONAL FAN

The STAR TRAC E-ST STEPPER is equipped with a built-in personal fan to increase your comfort during a workout. You can control

the fan speed during your workout.

To operate the personal fan:

n Press the key, as necessary, to cycle the personal fan from OFF to HIGH to LOW to OFF. An LED indicator lights to

show the currently selected fan speed.

n The fan remains set at the set speed if you pause your program, unless your workout was less than two minutes in length.

n The fan turns off automatically if you exit your workout, or when you complete your workout program.

n The fan turns off automatically if you pause your program and the time elapsed is less than two minutes.

STAR TRAC E-ST STEPPER OWNER’S MANUAL 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

StarTrac E-ST 5090 Stepper Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info