Bedienungsanleitung StarTrac E-ST 5090 Stepper (Seite 20 von 28) (Englisch)

619138

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

7. You can scroll through workout data during the program (see “Viewing Workout Data During a Program” for details).

8. If you wish to pause

the program, stop stepping. The Stepper will enter pause mode and display your workout results for one

entire cycle.

9. When you have reached your workout goal, the Stepper enters the Cooldown cycle (see “Cooldown Cycle” for details). If you

wish to exit the program before you have reached your workout goal, stop stepping and allow the Pause timer to expire.

FAT BURNER PROGRAM

The FAT BURNER program provides a high intensity interval workout.

To operate the program:

1. Mount the Stepper, begin stepping, and press the key.

2. You are prompted to enter your weight. The Stepper displays a default weight as set in Manager/Maintenance Mode. You may

enter any weight from 1 to 350 pounds (1 to 158 kg).

n Use the keys to enter your current weight; or press the or key, as necessary, to increase or decrease the

displayed weight in 1 pound (or 1 kg) increments.

n When your correct weight has been entered, press the key to accept the displayed value.

3. You are prompted to enter a time goal. The Stepper displays a default time of 20 minutes, or equal to the time parameter set

in Manager/Maintenance Mode if less than 20 minutes. You may enter any time from 1 to 99 minutes.

n Use the keys to enter the desired time goal, or press the or key, as necessary, to increase or decrease

the displayed value in 1 minute increments.

n When your desired time goal has been entered, press the key to accept the displayed value.

4. You are prompted to enter a difficulty LEVEL.

n Use the keys to enter a difficulty LEVEL (from 1 to 20) or press the or key, as desired, to increase or

decrease the difficulty LEVEL in 1 unit increments.

n When the desired difficulty LEVEL has been entered, press the key to accept the displayed LEVEL.

5. If desired, you can use the personal cooling fan during your workout (see “Using the Cooling Fan” for details).

6. You can adjust the difficulty LEVEL during the program using either of the following methods:

n Use the keys to enter a difficulty LEVEL (from 1 to 20). When the desired difficulty LEVEL has been entered, press

the key to confirm the difficulty LEVEL.

n Press the or key, as desired, to increase or decrease the difficulty LEVEL in 1 unit increments.

7. You can scroll through workout data during the program (see "Viewing Workout Data During a Program” for details).

8. If you wish to pause the program, stop stepping. The Stepper will enter pause mode and display your workout results for one

entire cycle.

9. When you have reached your workout goal, the Stepper enters the Cooldown cycle (see “Cooldown Cycle” for details). If you

wish to exit the program before you have reached your workout goal, stop stepping and allow the Pause timer to expire.

20 STAR TRAC E-ST STEPPER OWNER’S MANUAL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

StarTrac E-ST 5090 Stepper Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info