Bedienungsanleitung Steba BM1 (Seite 21 von 42) (Deutsch, Englisch, Französisch)

653372

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Power failure backup system

The bread maker is equipped with a power failure backup system or memory. If the

power system is interrupted during the course of bread making, the process of ma-

king bread will be continued automatically within 20 minutes, even without pressing

the “Start/Stop” button. If the interruption time exceeds 20 minutes, the memory

cannot be kept and you must discard the ingredients in the bread pan and start

again. If the dough has not entered the rising phase when the power supply breaks

off, you can press the “Start/Stop” button directly to continue the program from the

beginning.

After the bread is baked

When the baking is complete, 10 beeps will sound to alert you that the bread is rea-

dy, and then the unit will automatically switch to a warm setting.

Important: The bread maker has an automatic “Keep warm” setting that will keep

your bread warm for up to 1 hour. Press the “Start/Stop” button for 3 seconds to

cancel the “Keep warm” setting.

Use pot holders or oven mitts to carefully lift the pan by its handle from the bread

maker.

Turn the pan upside down and gently shake it until the bread comes out.

The bread pan has a non-stick coated finish so that the bread should come out easily.

Do not use metal utensils to remove bread as they may scratch the non-stick coating.

Let the bread maker cool down thoroughly before using it again. If “HHH” appears in

the display window, it indicates that the unit has not cooled sufficiently after baking

to use immediately again. In this case, allow the bread maker to cool down for 10 – 20

minutes.

Delay function

The maximum delay time is 13 hours

E.g. it is 6:00 pm and you want to have your bread on the following day at 6:00 am.

First, press the “Menu” button and select the required program. Each time pressing

the “Up” and “Down” arrows you can increase/decrease the delayed start time by 10

minute increments. Set the delay time to 12:00.

∙ Press the “Menu” button until the required program is selected.

∙ Set the delayed time: you simply have to press the “Up” and “Down” arrows on the

control panel until the display panel reads 12:00 for 12 hours.

∙ Once you have set the time, press the “Start/Stop” button and in 12 hours fresh

bread will be ready by the time you get up.

Warning hints

If you have selected the “Jam” or the “Bake” program and the temperature inside the

appliance is higher than 80°С, then the display screen will show “HHH” sign and will

not switch to the working mode. For the rest programs if the temperature exceeds

45°С, then the same “HHH” sign will appear on the display screen. It means that the

unit has not cooled sufficiently after baking to use immediately again. Unplug the

unit and allow it to cool. If the display shows “EE1” sign, it means that the appliance is

still too hot. Wait for “EE0” sign to appear on the display, which means that the unit

has cooled down.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steba BM1 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info