Bedienungsanleitung Steba IK 300 SC (Seite 12 von 24) (Deutsch, Englisch, Holländisch, Französisch)

536223

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

When the failure code E0 is in the display then the used pot or pan is not

suitable induction cookers. The appliance beeps 9 times and after ca 1 minute

the appliance will switch to the stand-by mode.

Temperature mode

This function is suitable for roasting meat and vegetables.

Place the pot in the middle of the cooking area.

Touch ON/OFF one time and after that 3 times the function button . A red LED

bellow the temperature symbol and in the display 180 can be seen. The cooling fan

starts to work. With the buttons or the temperature can be adjusted in 20

degree steps. During the cooking the temperature can be adjusted at any time. The

build in sensor keeps the temperature at about the adjusted temperature. The tem-

perature can be adjusted from 60°C up to 240°C.

When the failure code E0 is in the display then the used pot or pan is not

suitable induction cookers. The appliance beeps 9 times and after ca 1 minute

the appliance will switch to the stand-by mode.

Timer

The temperature or power must be adjusted first, as described above. Touch the func-

tion button so many times, until the red LED bellow the Timer symbol is blinking.

The display shows „0“. Now there is 5 seconds time to adjust the time by pressing the

button in steps of 5 minutes. The time can be adjusted from 5 to 180min. Pressing

the button decreases the time by 5 minutes. When the or button is pressed

one time the time increases or decreases by 5 minutes and a beeping noise can be

heard. When the or is pressed for a longer period no beeping sound can be

heard and the time can be adjusted faster.

If you want to change the time during the cooking touch the function button

until the timer LED is blinking. Now you have ca 5 seconds time to change

the timer setting.

When the function temperature and the timer is used and it is the intention to switch

to the power mode, then the Timer is not deleted.

When the ON/OFF button is touched during the cooking then the program will be

deleted and the appliances switches to the stand-by mode.

If the adjusted time runs out, the appliance will switch to the stand-by mode.

Residual heat „H“

When the glass plate gets hotter than ca 60°C the residual heat symbol „H“ can be

seen in the display and vanishes after the glass plate cools down. When the residual

heat light „H“ is on, then do not touch the cooking area. Danger of burns!!!

Please notice that the cooling fan is running during cooking to cool down the elec-

tronic inside.

To protect the electronic the cooling fan will work some minutes after the appliance

is switched off. This avoids that the appliance do not overheat and be damaged. Only

unplug the appliance after the cooling fan switched off by itself.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steba IK 300 SC Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info