754688
7
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
7
760.180 | 17.10
ENGLISH
6.1 Direct connection to the battery
CAUTION
The device does not function
XPlease pay attention to the correct polarity!
The compressor is switched off by the integrated deep discharge protection, but
the control unit remains in operation. The alarm sounds when the temperature
increases (see chapter 7.3).
NOTE
Connection to the battery
XSelect this type of connection when you wish to give your device a high priority
in the solar energy system, e.g. when you wish to cool / freeze critical products.
6.2 Connection to a charge controller with deep dis-
charge protection
CAUTION
The device does not function
XPlease pay attention to the correct polarity!
If the deep discharge protection of the charge controller completely switches off
the cabinet power, then the control unit also receives no power. When the device
is switched on again automatically, the integrated power outage display (see
chapter 9) informs you of the internal temperature reached.
NOTE
Connection to a charge controller
XSelect this type of connection when you wish to give your device the same
priority as other loads in the solar energy system, e.g. when you wish to cool /
freeze non-critical products.
7 Operating the device
7.1 Switching the device on / off
The device can be manually switched on or off using the button (On / Off).
If the cabinet is switched off, the minus symbol flashes to indicate that the
cabinet is still connected to the power.
When the device is connected for the first time, it must be manually switched on
by pressing the button (On / Off).
On delivery, the device is set to cool (+8 °C | 46 °F).
7.2 Setting the temperature
The standard internal temperature for normal operation is +8 °C | 46 °F. This
value can be changed in the following manner.
The desired internal temperature is set by pressing the buttons (Up /
Down). Pressing a button once causes the display to begin flashing.
If the button is pressed again while the display is flashing, each button
press increases / reduces the value by 1 °C | 1 °F.
If no button is pressed within a period of 5 seconds, the currently set value is
adopted as the actual temperature.
NOTE
Adjustable temperature range
XIn refrigerator mode, temperatures from +2 °C | 36 °F to +12 °C | 54 °F can be
set, and in freezer mode, temperatures from −10 °C | 14 °F to −20 °C | −4 °F
can be set.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Steca PF240-H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Steca PF240-H

Steca PF240-H Bedienungsanleitung - Deutsch - 15 seiten

Steca PF240-H Bedienungsanleitung - Französisch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info