Bedienungsanleitung Steinberg Sequel (Seite 85 von 97) (Englisch)

701005

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Setting up your system

Bring up the control panel for the audio hardware and ad-

just the settings as recommended by the audio hardware

manufacturer.

• Under Windows, you open the control panel by clicking

the “Setup…” button.

The control panel that appears when you click this button is provided by

the audio hardware manufacturer and not Sequel (unless you use Di-

rectX, see below). Hence it will be different for each audio card brand

and model.

The Control panel for the ASIO DirectX driver is an exception, as it is

provided by Steinberg, and is described in the dialog help, opened by

clicking the Help button in the dialog. See also the notes below.

• Under Mac OS X, you will find the control panel for your

audio hardware in the System Preferences (“Other” sec-

tion), opened from the Apple menu or from the Dock.

If you are using the built-in audio hardware of the Macintosh, you use the

“Sound” control panel in the System Preferences to set levels, balance,

etc. If you are using ASIO audio hardware, you can click the Control

Panel button to bring up its panel.

4. Click Apply and OK to close the dialog.

If you are using audio hardware with a DirectX driver

(Windows only)

Sequel comes with a driver called “ASIO DirectX Full Du-

plex Driver” available for selection on the Audio Connec-

tion pop-up menu in the Program Settings page.

Ö To be able to take full advantage of DirectX Full Du-

plex, the audio hardware must support WDM (Windows

Driver Model) in combination with DirectX version 8.1 or

higher.

In all other cases, the audio inputs will be emulated by DirectX (see the

dialog help for the ASIO DirectX Full Duplex Setup dialog for details

about how this is reported).

Ö During the installation of Sequel, the latest DirectX

driver will be installed on your computer.

When ASIO DirectX Full Duplex Driver is selected on the

Audio Connections pop-up menu, you can click “Setup...”

to open the ASIO Direct Sound Full Duplex Setup control

panel and adjust the following settings:

• Direct Sound Output and Input Ports

In the list to the left in the window, all available Direct Sound output and

input ports are listed. In many cases, there will be only one port in each

list. To activate or deactivate a port in the list, click the checkbox in the

left column. If the checkbox is ticked, the port is activated.

• You can edit the Buffer Size and Offset settings in this

list if necessary, by double-clicking on the value and typ-

ing in a new value.

In most cases, the default settings will work fine. Audio buffers are used

when audio data is transferred between Sequel and the audio card.

While larger buffers ensure that playback will occur without glitches, the

latency (the time between the moment Sequel sends out the data and

when it actually reaches the output) will be higher.

• Offset

If a constant offset is audible during playback of Audio and MIDI record-

ings, you can adjust the output or input latency time using this value.

Setting up the input and output ports

Setting the inputs and outputs primarily depends on the

configuration settings of your audio card. You can check

the configuration by clicking on “Setup...” on the Program

Settings page.

If you have a stereo in/out audio card this will most likely

be set up automatically.

Inputs

Setting the recording input for Sequel is discussed in

“Adding an audio track” on page 13.

Outputs

Audio outputs can be selected in the Program Settings

page from the Output Selector pop-up.

About monitoring

In Sequel, monitoring means listening to the input signal

while preparing to record or while recording. Sequel al-

ways monitors the signal in real-time.

The audio passes from the input into Sequel, possibly

through Sequel effects and EQ and then back to the out-

put. You control monitoring via settings in Sequel. This al-

lows you to control the monitoring level from Sequel and

add effects to the monitored signal only.

If your Windows audio hardware doesn’t have a spe-

cific ASIO driver, a DirectX driver is the next best op-

tion.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinberg Sequel Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info