Bedienungsanleitung Steinberg Sequel (Seite 93 von 97) (Englisch)

701005

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Effects reference

Flanger

Flanger works like the Chorus effect in that it doubles the

input signal. Instead of detuning it, it delays it slightly by a

gradually changing amount. The “Rate” parameter adjusts

the speed of the effect. “Feedback” determines the inten-

sity of the typical Flanger sweep. The “Mix” parameter de-

cides how much original signal you hear versus the

affected signal.

Phaser

The Phaser effect works by applying multiple filters to the

signal. “Rate” determines the speed of the effect. “Feed-

back” determines the intensity of the typical Phaser sweep.

The “Mix” parameter decides how much original signal you

hear versus the affected signal.

Rotary

Rotary emulates a rotating speaker, which is a popular ef-

fect for electronic organ sounds, but also works great for

guitar. The “Speed” parameter adjusts the speed of the

rotation.

Tremolo

Tremolo works by creating a repetitive variation of gain. It’s

sort of like an auto-volume knob. “Rate” determines the

speed of the gain adjustments. “Depth” determines how

wide the variation in gain will be.

Vibrato

Vibrato works by rapidly creating a slight change in pitch.

It’s the same idea as playing a note on a guitar and wiggling

your finger back and forth within the fret. “Rate” changes

the speed of the effect. “Depth” determines how wide the

variation in pitch will be.

Other Effects

Reverb

Reverb is a reverb effect. Reverb allows you make it sound

like your music was recorded in a large hall or cathedral.

The “Mix” parameter decides how much original signal you

hear versus the affected signal. “Time” determines the

length of the reverb, thus creating a sense of space.

Stereo Enhancer

Stereo Enhancer allows you to spread out your project’s

stereo image. This can create a greater sense of space for

crowded mixes. “Width” determines how wide the image

will be spread.

Instrument parameters

In the following table, the most common instrument pa-

rameters are listed.

Ö Note, however, that some of the preset sounds may

show different parameters. The sheer amount of preset

sounds makes it impossible to describe all the available

parameters.

Option Description

Cutoff This determines the cutoff frequency of the signal.

Resonance Resonance adds a ringing type effect to the signal

DCF Amount DCF amount determines how much filtering is applied to

each note.

Attack Attack adjusts how quickly you hear the initial hit of a

note.

DCA Decay DCA decay adjusts how each note will fade out.

DCA Sustain DCA Sustain determines how long you hear a note while

is it being played.

DCA Release DCA Release determines how long a note is held for

once it has been released.

DCA Amount DCA Amount is the amount of the DCA envelope.

Drive Drive gives a signal boost making the signal louder.

LFO Frequency LFO stands for “low frequency oscillation”. LFOs are

used to modulate and change a signal. This controls the

frequency that the LFO will operate on.

LFO Level This raises or lowers the volume of the LFO.

FX If the instrument has a certain effect built into it, the FX

parameter controls how much this effect is heard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinberg Sequel Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info