Bedienungsanleitung Steinel HF 360 COM (Seite 13 von 75) (Alle Sprachen)

593165

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

- 24 - - 25 -

Functions – Settings by potentiometer

Examples of use Brightness settings

Night-time mode min

Corridors, foyers 1

Stairs, escalators, moving walkways 2

Washrooms, toilets, switchrooms, canteens 3

Sales ﬂ oor, kindergartens, nursery school rooms,

sports halls

Work environments: Oﬃ ces, conference and mee-

ting rooms, precision assembly activities, kitchens

Working areas requiring good light:

Laboratory, technical drawing, precision work

>=6

Daylight mode max

Stay-'ON' time for switching

output 1

Setting 30 sec. – 30 min.

The chosen stay-'ON' time is infi-

nitely variable from a minimum

of approx. 30 sec. to a maximum

of 30 min. Light is calibrated after

3 min. When the threshold is

exceeded, the sensor switches

'OFF' after the stay-'ON' time

expires.

Time setting

If the dial is set to (fully anti-

clockwise), the unit is in pulse

mode, i.e. the output is switched

'ON' for approx. 2 sec. (e.g. for stair-

well lighting timer). Afterwards,

the sensor does not respond to

movement for approx. 8 sec.

Day mode is the only mode possi-

ble here because of dazzle by light

from external sources.

Turned fully clockwise: The stay-

'ON' time is self-learning and ad-

justs dynamically to user behav-

iour. The optimum time cycle is

determined by means of a learning

algorithm.

The shortest time is 5 min.,

the longest 20 min.

Pulse mode (except DIM)

IQ mode

The chosen response threshold

can be infinitely varied from

approx. 10 – 1000 lux.

Control dial turned fully clockwise:

MAX daylight mode

Control dial turned fully anti-clock-

wise: MIN night-time operation

Depending on the site of installa-

tion, the setting may need to

be corrected by 1-2 marks on

the scale.

Twilight setting

Potentiometer 

Potentiometer 

COM 1 + COM 2

Note: Depending on the site of installation, the setting may need to be corrected by 1 – 2 marks on the scale.

DIP 4

In the 'ON'-'OFF' setting, the light

can be switched 'ON' and 'OFF'

manually at any time (except in

pulse mode: no manual 'OFF').

In the 'ON' setting, light can no

longer be switched 'OFF' manu-

ally. The stay-'ON' time starts

from the beginning again each

time the button is pressed.

'ON'/'ON'-'OFF' button

DIP 1

Functions – Settings by DIP switch

Test mode has priority over all

other settings on the presence

detector and serves the purpose

of checking for proper working

order as well for testing the de-

tection zone. Irrespective of am-

bient light level, the presence

detector activates the light to

stay 'ON' for approx. 8 sec. in re-

sponse to movement in the

room (blue LED flashes when

movement is detected). All user-

selected potentiometer settings

apply in normal mode. The pres-

ence detector can also be set by

means of the blue LED without

any load connected.

Normal mode / Test mode (NORM / TEST)

DIP 2

The light automatically switches

'ON' and 'OFF' in relation to

brightness when someone is

present. Light can be switched

'ON' and 'OFF manually at any

time. This temporarily interrupts

the automatic switching func-

tion. Irrespective of the settings

selected, light stays 'ON' for 4

hours after manually pressing

the button twice or switches

'OFF' after manually pressing the

button once. Pressing the but-

ton before the 4 hours elapse

returns the Presence Control IR

Quattro to the normal operating

mode.

Semi-automatic mode (MAN) / fully automatic mode (AUTO)

Fully automatic mode: (AUTO)

Semi-automatic mode: (MAN)

The light now only switches

'OFF' automatically. Light is

switched 'ON' manually. Light

must be requested using the

button and stays 'ON' for the

time set at the potentiometer.

(pressing twice switches 'ON' for

4 hours).

DIP 3

Tells the sensor how to interpret

the incoming signal. Assigning

external buttons/switches allows

you to operate the detector as a

semi-automatic unit and over-

ride it manually at any time.

■ Operation either by button

or switch

■ Several buttons possible

on one control input

■ Only use illuminated push-

button with neutral conductor

connected

■ Cable length between sensor

and switch < 50 m

Button/switch

COM 1 + COM 2

DIP 5

Provides a constant level of

brightness. Detector measures

the prevailing level of daylight

and activates sufficient artificial

light to achieve the required lev-

el of brightness. As daylight

changes, the switched-in artifi-

cial lighting component is ad-

justed accordingly. In addition to

the daylight component, artificial

light is also switched 'ON' and

'OFF' in relation to whether or

not persons are present.

Constant light 'ON'/'OFF'

DIM

PC PRO HF360_DualHF_Zentraleuropa.indd 24-25PC PRO HF360_DualHF_Zentraleuropa.indd 24-25 11.09.13 10:3811.09.13 10:38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinel HF 360 COM Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info