Bedienungsanleitung Steinel HF 360 DIM (Seite 11 von 75) (Alle Sprachen)

593164

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

- 20 - - 21 -

How it works / Basic function

The high-frequency presence

detectors from the Control PRO

range control lighting as well as

heating, ventilation and air-con-

ditioning (COM 2 only), e.g. in of-

fices, WCs, public buildings or at

home, in relation to ambient

light level and the presence of

persons. Modern, high-frequen-

cy technology guarantees that

movement is detected absolute-

ly anywhere irrespective of radi-

ated temperature. Sensing

movement in two directions, the

DUAL HF sensor is ideal for corri-

dors in hotels, schools and office

buildings. The presence detec-

tor's switching outputs and

reach are set at the potentio-

meters and dip switches or by

means of the optional remote

control. Presence Control has

a low intrinsic power consump-

tion.

Presence Control PRO

HF 360 COM 1 / COM 1 AP

DUAL HF COM 1 / COM 1 AP

1 switching output operating

in relation to brightness setting

and presence of persons.

Settings:

- Brightness setting

- Stay-'ON' time, pulse mode,

IQ mode

Presence Control PRO

HF 360 COM 2

1 switching output, such as

COM 1. Plus a 2nd switching

output for HVAC (heating /

ventilation / air conditioning)

governed by presence.

Settings:

- Stay-'ON' time

- Switch-'ON' delay

- Room surveillance

Presence Control PRO

HF 360 DIM

DUAL HF DIM

1 switching output operating

in relation to brightness setting

and presence of persons.

Settings:

- Brightness setting

- Stay-'ON' time, IQ mode

- Orientation light

- Constant lighting control

Detection zone

The reach of the HF 360 is electronically adjustable.

1 or 2 detection directions can be masked out for

adjustment to the room situation. An angle of cov-

erage of 360° provides a max. reach of 8 m.

The DUAL HF sensor has 2 special HF sensors that

detect movement from the ceiling in both direc-

tions. Controlled electronically, reach is infinitely

variable in both directions from 3 x 3 m – 10 x 3 m.

HF 360 mounting height 2.8 m DUAL HF mounting height 2.8 m

쐽 Disconnect the power supply

before attempting any work

on the sensor!

쐽 During installation, the elec-

tric power cable to be con-

nected must be dead. There-

fore, switch 'OFF' the power

first and use a voltage tester

to make sure the wiring is off

circuit.

쐽 Installing the sensor involves

work on the mains power

supply. This work must there-

fore be carried out profes-

sionally in accordance with

the applicable national wir-

ing regulations and electrical

operating conditions (VDE

0100).

쐽 It is only permissible to use

electronic ballasts with isola-

ted control signal at the DIM

1-10 V control output.

System components

 Load module

 Sensor module

 Sensor base

 Dip switches

(1) Normal/test mode

(2) Semi-/fully automatic

mode

(3) Button/switch

(4) 'ON' / 'ON'-'OFF' button

(5) DIM option

Constant lighting control

'ON'/'OFF'

 Twilight setting

 Time setting

Switching output 1

 HVAC stay-'ON' time

Switching output 2

 HVAC switch-'ON' delay

Switching output 2

 Reach setting

 Clamping-type ceiling

adapter, optional

 Surface-mounting adapter

IP 54, optional

 Locking mechanism

 Assembly/Installation

 Parallel-connected

configurations

 Stay-'ON' time

Orientation light

DIM option

 Film shroud for minimising

the detection zone (HF 360).

Assembly/Installation  (see chart on page 2)

The sensor is only intended for

concealed, indoor installation in

ceilings (apart from the COM 1

AP - surface-mounted - option).

A clamping-type ceiling adapter

or surface-mounting adapter is

not included.

Sensor and load module come

ready assembled and must be

plugged together after fitting

the load module and setting the

potentiometers/dip switches.

Accessories:

Clamping-type ceiling adapter,

EAN no.: 4007841 000370

Surface-mounting adapter,

EAN no.: 4007841 000363

Guard cage,

EAN no.: 4007841 003036

Service remote control,

EAN no.: 4007841 000387

User remote control,

EAN no.: 4007841 003012

Operating instructions

Dear Customer,

Congratulation on purchasing

your new STEINEL presence de-

tector and thank you for the

confidence you have shown in

us. You have chosen a high-qual-

ity product that has been manu-

factured, tested and packed with

the greatest care.

Please familiarise yourself with

these instructions before at-

tempting to install the presence

detector because prolonged, re-

liable and trouble-free operation

will only be ensured if it is fitted

and used properly.

We hope your new STEINEL

sensor will bring you lasting

pleasure.

Safety warnings

PC PRO HF360_DualHF_Zentraleuropa.indd 20-21PC PRO HF360_DualHF_Zentraleuropa.indd 20-21 11.09.13 10:3811.09.13 10:38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinel HF 360 DIM Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info