593130

Steinel HL Stick Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/41
Nächste Seite
- 6 - - 7 -
Thank you
for choosing a STEINEL hot air tool.
This tool can be used for completing a
wide range of jobs safely and reliably,
such as shrink-fitting, de-soldering,
soldering etc. All STEINEL tools are
manu
factured to the highest standards
and undergo a strict process of quality
control.
Used properly (please refer to the
following safety precautions), the tool
will give you prolonged service and
lasting
satisfaction.
Translation of the German-language operating instructions
Safety precautions
!
Read and observe this information
before using the tool. Failure to
observe the operating instructions
may result in the tool becoming a
source of danger.
When using electric power tools, ob-
serve the following basic safety precau-
tions to protect yourself from electric
shock, the risk of injury and fire hazards.
Used carelessly, the tool can start an
unint
entional fire or injure persons.
Check the tool for any damage (mains
connection lead, housing etc.) before
putting it into operation and do not use
the tool if it is damaged.
The tool must not be a
llowed to
operate unattended.
Children should be supervised to make
sure they do not play with the device.
First time of use
A small quantity of smoke may occur
the first time the tool is used.
Take the ambient conditions
into account.
Do not expose electric power tools to
rain. Do not use electric power tools
when they are damp or in a damp or
wet environment. Exercise care when
using the tool in the proximity of com-
bustible materia
ls. Do not direct hot air
onto the same spot for any prolonged
period. Do not use in the presence of
an explosive atmosphere. Heat may
be conducted to combustible materials
t
hat are out of sight.
Protect yourself from
electric shock.
Avoid touching earthed installations
and appliances, such as pipework,
radiators, cookers, refrigerators. Do
not leave the tool unattended while in
operation.
Store your tools in
a safe place.
After use set the tool down on its stand-
ing surface and allow it to cool before
packing it away.
When not in use, tools should be stored
in a dry, locked room out of reach of
children. This tool is not intended for use
by persons (adults and children) with
physical, se
nsory or mental impairments
or lacking experience and/or knowledge
of use unless they are supervised by a
person responsible for their safety or
have received instructions fro
m that
person on how to use the tool.
Do not overload
your tools.
Your work results and safety will be
enhanced if you operate the tool within
the specified output range. After using
the tool for a prolonged period
at max-
imum temperature, you should reduce
the temperature before switching the
tool off. This will prolong the heating
element's useful life.Do not carry the
tool by the power cord and do not pull
the power cord to pull the plug out of
the power socket. Protect the power
cord from heat, oil and sharp edges.
Beware of toxic gases
and fire hazards.
Toxic gases may occur when working
on plastics, paints, varnishes or
similar materials.
Beware of fire and ignition hazards.
For your own safety, only use
accessories and attachments
that
are specified in the operating instruc-
tions or recommended or specified
by the tool manufacturer. Using
attachments or accessories other
than those recommended in the
o
perating instructions or catalogue
may result in personal injury.
Repairs must only be
carried out by a qualified
electrician.
This electric power tool complies
with the relevant safety regulations.
Repairs must only be performed by
a qua
lified electrician, otherwise the
user may run the risk of accidents.
If this tool's main power cord is
damaged, it must be replaced by
the manufacturer or its customer
service d
epartment or a similarly
qualified person so as to avoid
hazards.
Keep these safety precautions
with the tool.
Proper use
The STEINEL HL Stick power tool is intended for shaping plastic as well as for heating shrink tubing. It is also suitable
for soldering, de-soldering and undoing bonded joints. The tool is
not intended for use as a hot-air barbecue lighter,
as a hair-drier or for use in vehicles.
For your safety
• The thermal cut-out shuts the tool down if it is overloaded.
•
Attaching the reflector nozzle
C D
Technical specifications
Voltage
Output
Temperatures *
1
Airflow rate
Mains power cord
Protection class
Emission sound pressure level
Total vibration value
Weight
230-240 V, 50 Hz
350 W
400 °C without nozzle
500 °C with 7 mm reduction nozzle (included)
100 l / min. max.
H05
II
ⱕ 70 dB(A)
ⱕ 2.5 m/s
2
I K = 0.08 m/s
2
0.7 kg
Tool description - Operation
The tool is switched ON and OFF at the
3
slide switch. The distance from the object you are working on depends on
material and intended method of working. Always try out temperature on a test piece first. Using the attachable n
ozzles
(see accessories page on the cover) the flow of hot air can be controlled with maximum precision.
Take care when changing hot nozzles! When using the hot air tool in the self-resting position, make sure it is standing
on a stable, non-slip and clean surface.
Operation
Stainless steel outlet nozzle
Air inlet keeps out foreign matter
ON/OFF slide switch
Hanging ring
Rubber sheathed cord
LED light for illuminating
the work area
Standing surface
Tool features
1
2
3
4
5
6
7
*
1
Temperature profile
Distance from outlet nozzle 20 mm 30 mm 40 mm 50 mm 100 mm 150 mm 200 mm
Temperature without nozzle 360 °C 320 °C 280 °C 230 °C 150 °C 100 °C 75 °C
Temperature with nozzle 450 °C 350 °C 290 °C 250 °C 150 °C 100 °C 75 °C
9
GB
… 4 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Steinel HL Stick wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info