Bedienungsanleitung Steinel IS NM 360 (Seite 8 von 48) (Deutsch, Englisch, Polnisch)

592543

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1514

Permanent light function

If a mains switch is installed in

the mains supply lead, the light is

capable of the following functions

in addition to the simple "ON/OFF"

function:

Sensor operation

1) Switch light "ON"

(when light is"OFF"):

Turn switch "OFF" and "ON" once.

Light stays "ON" for the period

selected.

2) Switch light "OFF"

(when light is "ON"):

Turn switch "OFF" and "ON" once.

The light goes out or switches to

sensor mode.

Manual override

1) Activate manual override:

Turn switch "OFF" and "ON" once.

The light is set to stay on for 4 hours

(red LED lights up behind lens).

Then it returns automatically to sen-

sor mode (red LED off).

2) Deactivate manual override:

Switch "OFF" and "ON" once. The

light goes out or switches to sensor

mode.

Important:

The switch should be actuated in

rapid succession (in the 0.5 –1 sec.

range).

Once installed, the sensor can be

put into operation. Control dials

are provided on the sensor unit for

selecting time, twilight and pro-

gramme settings. After pressing the

engagement lug f with a flat-bladed

screwdriver, the sensor unit can be

removed for ease of setting. The

IS NM 360 and connected light

switch to permanent light "ON".

Switch-off delay

(time setting) g

(factory setting: 5 sec.)

Light "ON" time can be adjusted

continuously from 5 sec. to 15 min.

Control dial set to – = shortest time

(5 sec.)

Control dial set to + = longest time

(15 min.)

When setting the detection zone, it is

recommended to select the shortest

time –.

Functions , ,

h i

5 sec. – 15 min.

Programme setting

(factory setting:

programme 1)

2 - 2000 lux

Twilight setting

(response threshold)

h (factory setting:

daylight operation

2000 lux)

The sensor's response threshold can

be infinitely varied from 2 – 2000 lux.

Control dial set to = daylight opera-

tion at approx. 2000 lux.

Control dial set to = night-time

operation at approx. 2 lux.

To adjust the detection zone in day-

light, the control dial must be set to

(daylight operation).

2 - 2000 lux

* Note on comfort programme

midnight

The sensor contains no integrated

clock, the middle of the night is

determined by the length of the dark

phases. To work perfectly, therefore,

it is important for the connected

load to be permanently supplied

with power during this period. Dur-

ing the first night (calibration phase)

basic brightness remains activated

throughout the night. Values remain

saved even in the event of mains

power failure. We recommend not

to interrupt the power supply in

programme

. As the values are

determined over several nights, the

connected load should, in the event

of any fault, be observed over several

nights to ascertain whether the switch-

off time moves towards midnight.

Functions , ,

h i

Standard programme

●

Sensor "ON" only in response to

movement as from the selected

light threshold setting

Comfort programme

- evening

●

Sensor "ON" for approx. 2 hours as

from the selected twilight setting,

followed by normal sensor mode (4)

Comfort programme

evening/morning

●

Sensor "ON" for approx. 2 hours as

from the selected twilight setting,

followed by normal sensor mode

and, once again, approx. 2 hours of

constant light as from the twilight

setting at dawn

Comfort programme

- midnight*

●

Sensor "ON" to the middle of the

night* as from the selected twilight

setting, followed by standard

programme

IS NM 360_Osteuropa Vs_D.indd 17 15.10.12 11:22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinel IS NM 360 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info