Bedienungsanleitung Steinel L 710 LED (Seite 7 von 55) (Alle Sprachen)

758029

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

– 12 – – 13 –

Manual override (Fig.6.2)

1) Activate manual override:

Switch OFF and ON twice. The light is set

to manual override for 4 hours. Then it returns

automatically to sensor mode.

2) Deactivate manual override:

Switch OFF and ON once. Light goes out or

switches to sensor operation.

Important:

Switching must take place within 0.2 to 1 second.

Adjusting the detection zone (Fig.6.3-6.6)

The detection zone can be limited to suit require-

ments. The shrouds supplied with the unit can be

used to mask out as many lens segments as you

wish. This prevents the light from being activated

unintentionally, e.g. by cars, passersby etc., and

allows you to target danger spots. The shrouds can

be cut along the grooved vertical divisions. Then

you simply clip them onto the lens.

7. Maintenance

The product requires no maintenance.

The light can be cleaned with a damp cloth (without

detergents) if dirty.

8. Disposal

Electrical and electronic equipment, accessories

and packaging must be recycled in an environmen-

tally compatible manner.

Do not dispose of electrical and electronic

equipment as domestic waste.

EU countries only:

Under the current European Directive on Waste

Electrical and Electronic Equipment and its imple-

mentation in national law, electrical and electronic

equipment no longer suitable for use must be col-

lected separately and recycled in an environmentally

compatible manner.

9. Manufacturer's Warranty

This STEINEL product has been manufactured

with the utmost care, tested for proper operation

and safety and then subjected to random sample

inspection. Steinel guarantees that it is in perfect

condition and proper working order. The warranty

period is 36months and starts on the date of sale

to the consumer. We will remedy defects caused by

material ﬂaws or manufacturing faults. The warranty

will be met by repair or replacement of defective

parts at our own discretion. The warranty shall not

cover damage to wear parts, damage or defects

caused by improper treatment or maintenance.

Further consequential damage to other objects shall

be excluded. Claims under the warranty will only be

accepted if the unit is sent fully assembled and well-

packed with a brief description of the fault, a receipt

or invoice (date of purchase and dealer’s stamp) to

the appropriate Service Centre.

Service:

Our Customer Service Department will repair faults

not covered by warranty or after the warranty

period. Please send the product well-packed to

your nearest service station.

MANUFACTURER'S

YEAR

WARRANTY

MANUFACTURER'S

YEAR

WARRANTY

MANUFACTURER'S

YEAR

WARRANTY

5. Mounting

• Check all components for damage.

• Do not use the product if it is damaged.

• When installing the LED luminaire, make sure the

installation site is not subject to vibration.

• Select an appropriate mounting location, taking

the reach and motion detection into considera-

tion.

Mounting procedure

• Switch OFF power supply (Fig.4.1)

• Undo screws (Fig.5.1)

• Press catch and pull luminaire o the wall mount

(Fig.5.2)

• Undo retaining strap and terminal and remove

luminaire (Fig.5.3)

• Mark drill holes (Fig.5.4)

• Drill holes and insert wall plugs (Fig.5.5)

• Pierce sealing plug for power supply lead

(Fig. 5.6)

• Concealed mounting (Fig.5.7)

• Surface mounting (Fig.5.8)

• Attach retaining strap and terminal to the wall

mount (Fig.5.9)

• Connect conductors (Fig.5.10)

• Remove retaining strap on lamp side and store in

wall mount (Fig.5.11)

• Install luminaire enclosure on wall mount

(Fig.5.12)

• Tighten screws (Fig.5.13)

• Switch ON power supply (Fig.5.13)

• Make settings ➜ "6.Function"

6. Function

Factory settings

Time setting: 5 seconds

Twilight setting: daytime operation

Night light: OFF

Time setting (Fig.6.1H)

The light's stay ON time can be set to any period

from approx. 5 seconds to a maximum of 15min-

utes. Any movement detected before this time

elapses will restart the timer.

Twilight setting (Fig.6.1G)

The chosen response threshold can be inﬁnitely

varied from approx. 2 to 2000 lux.

– Control dial set to = daylight mode

(depending on ambient brightness)

– Control dial set to = twilight mode

(approx. 2 lux)

Night light (Fig.6.1.F)

Standard programme

– Soft light start / no night light

What is soft light start?

The sensor-switched light features a soft light start

function. This means that when turned ON, the light

is not switched directly to maximum output but con-

stantly builds up brightness to 100% within a short

period of time. Brightness is also gradually reduced

when the light is switched OFF.

User-friendly economy programme

– Soft light start + night light until the middle of the

night

– Night light ON as from selected light-level setting

until the middle of the night

How does the user-friendly economy pro-

gramme work?

The sensor-switched light does not have an

integrated clock. The middle of the night is only

determined on the basis of the length of darkness

phases. To work perfectly, therefore, it is important

for the sensor-switched light to be permanently

connected to the power supply during this period.

During the ﬁrst night (calibration phase), the night

light remains activated throughout the night. The

values are saved even in the event of a mains power

failure. We do not recommend interrupting the pow-

er supply in this the programme. The values are de-

termined over several nights. The sensor-switched

light should, in the event of any fault occurring, be

monitored over several nights to ascertain whether

the switch-o time moves towards midnight.

User-friendly programme

– Soft light start + night light

– Night light ON as from light-level setting selected

What is night light?

Night light provides illumination at night of ap-

prox. 10% light output. The light only switches to

maximum output (100%) for the time selected in

response to movement in the detection zone. The

light then switches back to night light (approx. 10%).

Nightmatic programme

– Soft light start, no night light, no movement

evaluation

– Switches ON at 100% if the light level falls below

the level set

Steinel L 710 LED Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info