Bedienungsanleitung Steinel L 830 C (Seite 19 von 155) (Alle Sprachen)

758077

Zoom out

Zoom in

Vorherige Seite

1/155

Nächste Seite

- 36 - - 37 -

5. Mounting

• Check all components for damage.

• Do not use the product if it is damaged.

• When installing the sensor-switched light, make sure the installation site is

not exposed to vibration.

• Select an appropriate mounting location, taking the reach and motion

detection into consideration.

Mounting procedure (L 830, L 835, L 840SC/C)

• Switch OFF power supply. (Fig.4.1)

• Undo retaining screws and detach light cube from the wall mount. (Fig.5.1)

• Mark drill holes (Fig.5.2)

• Drill holes and ﬁt wall plugs. (Fig.5.3)

• Pierce sealing plug.

• Installation with concealed power supply lead (Fig.5.4)

• Installation with surface-mounted power supply lead (Fig.5.5)

• Connect conductors (Fig.5.6)

• Fit light cube onto wall mount (Fig.5.7)

• Screw in retaining screws (Fig.5.7)

• Switch ON power supply (Fig.5.7)

• Make settings via app (SC only)

➔ "6. Function"

Mounting procedure (GL 80SC/C)

• Switch OFF power supply (Fig.4.1)

• Undo retaining screw and remove light cube from the cover (Fig.5.8)

• Pull cable through base plate and proﬁle (Fig.5.9)

• Screw base plate to proﬁle (Fig.5.10)

• Mark base plate drill holes (Fig.5.11)

• Drill holes and insert screw anchors (Fig.5.12)

• Screw base plate to the ﬂoor/ground (Fig.5.13)

• Screw cover onto proﬁle (Fig.5.14)

• Connect conductors (Fig.5.15)

• Fit light cube to cover (Fig.5.16)

• Screw in retaining screw (Fig.5.16)

• Switch ON power supply (Fig.5.16)

• Make settings via app (SC only)

➔ "6. Function"

6. Function

The functions can be set for the SC types.

Functions are set via the Smart Remote app.

Smart Remote app

To conﬁgure the light via smartphone or tablet, you must download the

STEINEL Smart Remote app from your app store. You will need a Blue-

tooth-capable smartphone or tablet.

Android iOS

Functions that can be set via Smart Remote app are:

– Time setting

– Reach adjustment

– Twilight setting

– Night-light function

– Main light / night light level can be adjusted

– Extended reach adjustment

– Group interconnection

– Twilight setting by teach-in

Time setting (stay-ON time)

The light's ON time can be set to any period from approx. 5 seconds to a

maximum of 60minutes. Any movement detected before this time elapses will

restart the timer.

This function only ever applies to the C types in combination with a

Bluetooth sensor-switched product.

Note:

After the light switches OFF, it takes approx. 1 second before it is able to start

detecting movement again. The light will only switch ON in response to

movement once this period has elapsed.

The shortest time setting is recommended when adjusting the detection zone

and performing the functional test.

Reach setting (sensitivity)

Reach is the term used to describe the diameter of the more or less circular

detection zone produced on the ground after mounting the sensor-switched

light at a height of 2 m.

– Control dial set to maximum = max. reach (5 m)

– Control dial set to minimum = min. reach (1 m)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinel L 830 C Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info