Bedienungsanleitung Steinel L224 LED (Seite 7 von 55) (Alle Sprachen)

758034

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

– 12 – – 13 –

10. Troubleshooting

Malfunction Cause Remedy

Sensor-switched light

without power

■ Fuse faulty, not switched ON,

break in wiring

■ Fit new fuse, turn ON mains

switch, check wiring with voltage

tester

Sensor-switched light

will not switch ON

■ Surroundings still too bright

■ Mains switch OFF

■ Fuse blown

■ Detection zone not correctly

adjusted

■ Wait until response threshold is

reached or adjust setting

■ Switch ON

■ Fit new fuse, check connection

if necessary

■ Readjust

Sensor-switched light

will not switch OFF

■ Continued movement within

the detection zone

■ Check detection zone and

readjust if necessary

Sensor-switched light

switching ON when it

should not

■ Cars in the street are detected,

for example

■ Check detection zone and

readjust if necessary

Changing reach ■ Differing ambient temperatures ■ When it is cold, shorten reach

by tilting sensor down,

move it up in warm weather

8. Manufacturer's warranty

This Steinel product has been manufactured with

utmost care, tested for proper operation and safety

and then subjected to random sample inspection.

Steinel guarantees that it is in perfect condition

and proper working order. The warranty period is

36 months and starts on the date of sale to the

consumer. We will remedy defects caused by

material ﬂaws or manufacturing faults. The warran-

ty will be met by repair or replacement of defective

parts at our own discretion. The warranty shall not

cover damage to wear parts, damage or defects

caused by improper treatment or maintenance.

Further consequential damage to other objects

shall be excluded.

Claims under the warranty will only be accepted

if the unit is sent fully assembled and well-packed

with a brief description of the fault, a receipt or

invoice (date of purchase and dealer's stamp) to

the appropriate Service Centre.

Repair service:

If defects occur outside the warranty period or are

not covered by the warranty, ask your nearest ser-

vice station for the possibility of repair.

MANUFACTURER'S

YEAR

WARRANTY

MANUFACTURER'S

YEAR

WARRANTY

MANUFACTURER'S

YEAR

WARRANTY

9. Technical speciﬁcations

Dimensions (W × H × D) L 240/L 244 LED 165 × 305 × 81

L 220/L 224 LED 246 × 251 × 84

Voltage supply 220-240 V, 50 / 60 Hz

Output L 220 7.5 W 550 lm 73.3 lm/W

L 224 7.5 W 410 lm 54.7 lm/W

L 240 7.5 W 570 lm 76.0 lm/W

L 244 7.5 W 500 lm 66.7 lm/W

Colour temperature 3000 K (warm white), SDCM 3

Colour rendering index Ra ≥ 80

LED life expectancy 50,000 h (L70B10 to LM80)

Sensor technology Passive infrared

Angle of coverage 180°

Reach max. 10 m

Time setting 8 s - 35 min

Twilight setting 2-2000 lux

IP rating IP 44

Protection class II

Impact resistance IK 07

Temperature range -20° to +50°C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinel L224 LED Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info