11
Description
feed rod
compartment for storing
cartridge cap
trigger
power cord
base station with status
indicator
screw cap
heating head
Technical Specifications
Mains voltage:: 220–240 V, 50 Hz
Heating output: 14 W, starting phase (500 W)
Heat-up time: 10–13 min.
Adhesive working temperature: 100–140 °C
Time allowed for alignment: 60 ± 15 sec.
(depending on materials being glued)
Max. working time after heat-up approx. 15–20 min. (cordless glueing)
(after disconnecting from mains power):
Cartridge content: 50 g
Final adhesive bond strength achieved: 1–5 days
(depending on materials being glued)
Glue life: see information printed on cartridge
(use within 4 weeks of opening)
Safety warnings
Carefully read through
the operating instruc-
tions before using the
glue gun.
The PUR hot melt adhe-
sive reaches a tempera-
ture of 140 °C. Caution:
burn hazard. If glue
comes into contact with
skin, immediately hold
affected area under cold
running water for several
minutes. Do not attempt
to remove glue from skin
first. In case of emergen-
cy, consult a doctor.
Wear suitable gloves
when working with the
glue gun.
Keep out of the reach
of children.
Only apply heat (130 °C,
using hot air gun) to
remove glue in well-
ventilated rooms.
Sensitisation may occur
as a result of inhalation
or contact with the skin.
Immediately consult a
doctor in the event of
accident or queasiness.
Perfect operation will
only be guaranteed by
using genuine STEINEL
PUR hot melt adhesive.
The STEINEL PUR GLUE
50 hot melt glue gun is a
single-component cartridge
glue gun for hot melt PUR
(polyurethane) adhesive.
This adhesive features the
following properties:
Bonds ceramics, metal,
marble, glass, wood,
various plastics (except
PP, PE, polystyrene and
silicone), leather and
textiles.
Fast initial bond combi-
ned with high final bond
strength.
Suitable for indoor and
outdoor use because
resistant to temperatures
from –40 °C to +100 °C.
Weatherproof
Solvent-free
Excess glue is easily
removed from surfaces,
e.g. wood, without leav-
ing marks or the need
for corrective action.
Time taken for glue to
set fully will depend on
the natural moisture con-
tent of materials used
(1 – 5 days)
(see table, p. 14).
Resistant to high tem-
peratures (bond will
remain intact until
heated to 130 °C).
Clear, light-ivory colour
in molten state, sets
crystal clear.
Principle
10
Operating Instructions
GB
Dear Customer,
Congratulations on pur-
chasing your new PUR
GLUE 50 hot melt glue
gun and thank you for the
confidence you have shown
in us. You have chosen a
high-quality product that
has been manufactured,
tested and packed with the
greatest care.
Please familiarise yourself
with these instructions
before attempting to use
the glue gun. The greater
the care you take in hand-
ling your new product,
the longer it will continue
to provide reliable service.
We hope your new
STEINEL PUR GLUE 50
cartridge glue gun will give
you lasting satisfaction.
GB
