Bedienungsanleitung Steinel XLED home 2 SL (Seite 5 von 7) (Deutsch, Englisch, Schwedisch)

643151

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

– 8 –

– 9 –

1� About this document

Please read carefully and keep in a safe place�

– Under copyright. Reproduction either in whole or

in part only with our consent.

– Subject to change in the interest of technical

progress.

Symbols

Hazard warning!

...

Reference to other information in the

document�

2� General safety precautions

Disconnect the power supply before

attempting any work on the unit�

• Installing these units involves work on the mains

voltage supply; installation must therefore be

carried out professionally in accordance with

the applicable national wiring regulations and

electrical operating conditions (

-VDE 0100,

-ÖVE/ÖNORM E 8001-1,

-SEV 1000)

• The light must be positioned so that it is not

expected that anybody can stare into the light

for any prolonged period from a distance of

less than 0.3 m.

• The ﬂoodlight enclosure heats up when the light

is on. Only adjust the angle of the LED panel

once it has cooled down. Do not look into the

LED light at short range or for any prolonged

period (> 5 min). You could damage your retina.

• Do not install the light on normally ﬂammable

surfaces.

3. XLED home 2 SL /

XLED home 2 XL SL

Proper use

– LED ﬂoodlight suitable for wall mounting outdoors.

– Fully swivelling LED panel.

– Available as standalone ﬂoodlight or intercon-

nected with the master version.

With the fully swivelling panel, the ﬂoodlight can

be used at home to provide perfect illumination for

lighting up property, or commercially for lighting

up business premises. In conjunction with the opal

cover, this extremely ecient technology provides

wide-area lighting.

Models

– XLED home 2 SL

– XLED home 2 XL SL

Package contents (Fig� 3�1)

Floodlight adjustment range (Fig� 3�2 / 3�3)

Product dimensions (Fig� 3�4 / 3�5)

Product components (Fig� 3�6)

A LED panel

B Enclosure

C Wall mount

4� Electrical installation

Connecting the mains power supply lead

The supply lead consist of three wires:

L = phase conductor (usually black, brown or

grey)

N = neutral conductor (usually blue)

PE = protective-earth conductor (green/yellow)

If you are in any doubt, identify the conductors

using a voltage tester; then disconnect from the

power supply again. Connect the phase conductor

(L) and neutral conductor (N) to the terminal block.

Important:

Incorrectly wired connections will produce a short

circuit later on in the product or your fuse box.

In this case, you must identify the individual

conductors once again and reconnect them.

The light source of this luminaire cannot be

replaced. If the light source needs to be replaced

(e.g. at the end of its service life), the complete

luminaire must be replaced.

5� Mounting

• Check all components for damage.

• Do not use the product if it is damaged.

Mounting procedure

• Switch OFF power supply. (Fig� 3�7)

• Undo retaining screws. (Fig� 4�1)

• Detach enclosure (B) from wall mount (C).

(Fig� 4�2)

• Detach plug-in terminal (male) from wall mount.

(Fig� 4�3)

• Mark drill holes. (Fig� 4�4)

• Drill holes and insert wall plugs (Fig� 4�5)

• Fit sealing plug. (Fig� 4�6)

– Power supply lead, concealed (Fig� 4�7)

– Power supply lead, surface-mounted, with

spacers. (Fig� 4�8)

• Connect conductors. (Fig� 4�9)

• Connect plug-in terminal. (Fig� 4�10)

• Fit enclosure onto wall mount. (Fig� 4�11)

• Screw in retaining screws. (Fig� 4�12)

• Switch ON power supply. (Fig� 4�12)

6� EC Declaration of Conformity

This product complies with the requirements

deﬁned in the following standards, legislation and

directives:

– Low Voltage Directive 2014/35/EU

– EMC Directive 2014/30/EU

– RoHS Directive 2011/65/EU

– WEEE 2012/19/EU

7� Warranty

This STEINEL product has been manufactured with

utmost care, tested for proper operation and safety

and then subjected to random sample inspection.

Steinel guarantees that it is in perfect condition

and proper working order. The warranty period is

5 years and starts on the date of sale to the con-

sumer. We will remedy defects caused by material

ﬂaws or manufacturing faults. The warranty will be

met by repair or replacement of defective parts at

our own discretion. The warranty shall not cover

damage to wear parts, damage or defects caused

by improper treatment or maintenance. Further

consequential damage to other objects shall be

excluded. Claims under the warranty will only be

accepted if the unit is sent fully assembled and

well-packed with a brief description of the fault, a

receipt or invoice (date of purchase and dealer's

stamp) to the appropriate Service Centre.

Service:

Our Customer Service Department will repair faults

not covered by warranty or after the warranty

period has expired. Please send the product well-

packed to your nearest Service Centre.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinel XLED home 2 SL Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info