Bedienungsanleitung Stiebel Eltron CK 20 Premium (Seite 20 von 92) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

742506

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

OPERATION

Settings

20 | CK 20 Premium www.stiebel-eltron.com

5.3.2 Silent mode

You can choose between the following two heating outputs with

matched fan speed:

Base heating stage

Set "Lo" in the standard menu for silent mode. The appliance heats

with a heating output of 1000W and reduced fan speed. The LED

on the programming unit illuminates green.

Note

Do not operate the appliance at the base heating stage

if the room where it is installed has cooled down sig-

niﬁcantly.

 If the room has cooled down signiﬁcantly, switch the

appliance to the rapid heating stage in order to en-

sure normal appliance operation.

Rapid heating stage

Set "Hi" in the standard menu for silent mode. The appliance heats

with a heating output of 2000W and fast fan speed.

Select the powerful rapid heating stage if you need to heat up a

cold room rapidly to the selected temperature. Then set the base

heating stage again.

When the selected room temperature has been reached, it is main-

tained by the appliance through periodic heating.

5.4 Conﬁguration menu

Display Description

I1-I2 Actual values

Pro1-Pro3 Time programs

P1-P5 Parameter

In the conﬁguration menu, you can call up actual values, set time

programs and adjust parameters.

To access the conﬁguration menu, press and hold "Menu". After

approx.3seconds, actual valueI1 is displayed.

Use "+" and "–" to switch between the individual actual values,

time programs and parameters.

To exit the conﬁguration menu, press "Menu". The standard dis-

play appears.

5.4.1 Actual values

The following actual values can be called up:

Display Description Unit

I1 Actual room temperature [°C] | [°F]

I2 Relative heating time

(The counter can be reset via parameter P5.)

[h]

Note

The counter for relative heating time(I2) counts in com-

plete hours how long the appliance heats for. When the

appliance is switched off, any heating phase of less than

60minutes is not recorded.

5.4.2 Time programs

Three time programs are available. Time programs Pro1 and Pro2

are pre-conﬁgured at the factory. Time program Pro3 can be set

according to your individual requirements.

Display Description

Pro1 Time program "Daily"

- Repeated: Monday to Sunday

Pro2 Time program "Weekdays"

- Repeated: Monday to Friday

Pro3 Time program "User defined"

- up to 14comfort phases, freely configurable

Note

To use a time program, select the required time program

from the standard menu (see chapter "Settings/ Standard

menu").

Note

Ensure the day of the week and the time are set correctly

when setting the time programs.

Note

The following applies to all time programs (Pro1, Pro2,

Pro3):

If the end time is later than 23:59h, the end time will

automatically be moved to the next day of the week. The

comfort phase is maintained past midnight and will end

on the next day at the set end time.

Time programs Pro1 and Pro2

You can specify the comfort mode start and end times with time

programsPro1 and Pro2. During this time period, the appliance

heats to the set comfort temperature. Outside this speciﬁed time

period, the appliance operates in setback mode. This results

in a comfort phase and a setback phase, which are repeated

daily(Pro1) or on every working day (Pro2).

Theses phases are factory-set as follows:

- 08:00h - 22:00h: Comfort mode

- 22:00h - 08:00h: Setback mode

Note

When time programPro2 is enabled, the appliance oper-

ates at weekends exclusively in setback mode.

To adapt time programsPro1 and Pro2 according to your needs,

proceed as follows:

 In the conﬁguration menu, use "+" and "–" to call up the re-

quired time program.

 Press "OK".

The start time for comfort mode is displayed.

 Use "+" and "–" to set the required start time.

 Press "OK".

The end time for comfort mode is displayed.

 Use "+" and "–" to set the required end time.

 Press "OK" to save.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiebel Eltron CK 20 Premium Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info