650337
31
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
ENGLISH
www.stiebel-eltron.com DHE SLi | 31
INSTALLATION
Installation
Installing the appliance
18
21
24
kW
26�02�02�0934�
For easy installation, push the cable grommet of the upper
electrical connection into the back panel from behind.
Remove the transport plugs from the water connections.
Remove the fixing toggle from the upper part of the back
panel.
Route the power cable from behind through the cable grom-
met until it rests against the cable sheath. Align the power
cable.
In the case of a cross-section >6mm², enlarge the hole in
the cable grommet.
Push the appliance over the threaded stud of the mounting
bracket, so that it breaks through the soft seal. If necessary,
use a screwdriver.
Push the fixing toggle onto the threaded stud of the mount-
ing bracket.
Press the back panel firmly into place and lock the fixing tog-
gle by turning it clockwise through 90°.
24
19
D0000056244
Fit the pipes with flat gaskets onto the twin connectors.
Connecting the power supply
WARNING Electrocution
Carry out all electrical connection and installation work
in accordance with relevant regulations.
WARNING Electrocution
Connection to the power supply is only permissible in
the form of a permanent connection in conjunction with
the removable cable grommet. Ensure that the appliance
can be separated from the power supply by an isolator
that disconnects all poles with at least 3mm contact
separation.
WARNING Electrocution
Ensure that the appliance is earthed.
26�02�02�1122�
Connect the power cable to the mains terminal (see chapter
"Specification / Wiring diagram"). The specified voltage must
match the mains voltage.
Connected load options
Up to 3 connected load stages can be selected, subject to appliance
type. The middle load is preset. If you wish to select a different
load, please follow the steps below.
18
21 24
kW
26�02�02�0935�
Select the connected load you require (see chapter "Specifi-
cation/ Data table").
Replug the coding card in accordance with the selected con-
nected load.
Change the type plate. Tick the selected connected load.
Please use a ballpoint pen to do this.
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stiebel Eltron DHE 24 SLi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info