Bedienungsanleitung Stiebel Eltron Thermocon BHE 75 (Seite 8 von 18) (Deutsch, Englisch, Holländisch, Französisch)

457718

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

The most important points

in brief

1 ON/OFF button

2 LED indicator “appliance ON”

3 Room thermostat

4 LED indicator “appliance heating up“

5 LED indicator “rapid heating function”

6 Short-time timer for “rapid heating

function”

7 ON/OFF button for “rapid heating

function”

 

 



652

C26_07_80_0003

1. Operating instructions for users and contractors

The installation and use of electrical appliances

must be carried out with due caution in order

to avoid the risk of fire, electric shock or injury.

The equipment must only be used as described

in these instructions. Any use outside of the

manufacturer recommendations could lead to

damage, fire, shock or injury.

The heat requirement of the room should be

matched to the heat output of the unit.

Before using the appliance the instructions

should be read in their entirety and all ap-

propriate handling of the equipment must be

observed.

These instructions should be kept safe-

ly and passed on to any future owner.

In the event of any repair work, hand them

WRWKHTXDOLÀHGLQVWDOOHUIRUKLVDWWHQWLRQ

1.1 Unit description

The BHE thermocon towel rail radiator is suit-

able for use as supplementary heating as well

as for drying and warming towels. There are

several levels for hanging these.

The appliance is ready for operation after it

has been fixed on a wall and connected to the

mains by means of the mains plug.

1.2 Operation

The BHE is operated via the control panel on

the front.

The heater is be switched on via the ON/OFF

button (1). Set the room temperature to

between approx. + 6 °C and + 30 °C on the

room thermostat (3).

After the adjusted ambient temperature has

been reached, it will remain constantly, until the

appliance is switched off (the heating capacity

of the appliance must correspond at least to

the necessary heat requirement of the room).

Rapid heating function

With the rapid-heating-function the BHE will

run for the preselected period for continuous

operation, regardless of the temperature set

on the room thermostat.

The heating time can be set at ¼ h, ½ h, 1 h

or 2 h on the short-time timer (6) and is acti-

vated by the rapid-heating button (7).

If the heating time is to be ended before the

end of the set period, the rapid heating button

must be pressed again.

Frost protection

In the event of a lengthy absence, the room

temperature should not fall below approx.

+6 °C (frost protection) and the room ther-

mostat should be turned to the Â position

and the appliance must remain switched on

(observe the heating capacity of the appliance

and heat requirement of the room).

Taking the appliance out of operation

In order to take the equipment completely

out of operation, switch it off, take the supply

plug out and stop water supply (via thermo-

static valve).

1.3 Safety instructions

Do not operate the appliance

² LQURRPVZKLFKSUHVHQWÀUHRUH[SORVLRQ

risks as a result of chemicals, dust, gases

or fumes;

– in the immediate vicinity of pipes or con-

tainers which carry or contain combusti-

ble or potentially explosive substances;

– if the minimum distances from adjoining

surfaces of objects are not met.

x The surfaces of the appliance get hot when

it is operating (approx. 80 °C). There is a

risk of burns!

x If it is intended that children or persons with

restricted physical, sensory, or mental capac-

ity should operate the appliance, it must be

ensured that this is only done after appropri-

ate instruction has been provided by the

person responsible for their safety.

Children should be supervised to ensure that

they do not play with the device.

Do not cover the device!

Combustible or inflammable objects, such

as containers of wax or petrol, aerosols and

such like, must not be placed on or in the

immediate vicinity of the appliance. Risk of

WKHLUFDWFKLQJÀUH

x For objects of all kinds, such as newspapers,

furniture, curtains and drapes or other com-

bustible materials, the following minimum

distances from the heater must be observed:

bottom 200 mm

sides and top 150 mm

x The surface of the BHE may be hot even

when it is switched off.

x This appliance is intended only for warming

or drying textiles which have been made

damp by water (not dry cleaning).

x Do not climb on the appliance (in particular,

draw children’s attention to this).

x No changes at the equipment must be made.

x Never leave the appliance when in use un-

supervised.

x Special caution is required, if the appliance

is used in the presence of children, invalid

persons or animals. Danger of injury!

x If a part of the appliance is damaged or has

fallen down or it was already defect/malfan-

ctioning, it may no be taken in to operation.

1.4 Care and maintenance

Clean the appliance regularly when it is cold,

using standard care agents. Avoid the use of

abrasive and corrosive agents.

As part of regular maintenance, we recommend

that you have the control and regulating devices

checked as well. Safety, control and regulating

devices should be checked by a qualified installer

not later than 10 years after first start-up.

Type BHE 75 BHE 75 L

Dimensions h / w / d mm 1225 / 550 / 85 1436 / 550 / 137

Weight kg 17,5 27,5

Connection 1/N ~ 230 V 50/60 Hz

Volume of heat transfer liquid l approx. 5,9 approx. 6,4

max. inlet temperature °C 110

max. operating pressure bar 4,0

Rated output kW 0,75

Temperature setting range °C approx. + 6 to +30

Frost protection °C approx. +6

Protection mode IP 24 (splash proof)

Protection class

II (double-insulated)

Licences see type plate

Technical data

Stiebel Eltron Thermocon BHE 75 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info